Laurent
DUBAR

Boungomba H., Moreau P., Sadat T., Lilensten L., Dubar M., Dubar L. (2024). Wear. Investigation of the impact of AISI D2 tool steel wear and lubrication type on the evolution of the friction coefficient during cold winding process, pp. 205272 [DOI=https://doi.org/10.1016/j.wear.2024.205272].

Dubois A., Filali O., Dubar L. (2024). Effect of roughness, contact pressure and lubrication on the onset of galling of the 6082 aluminium alloy in cold forming, a numerical approach. Wear, 536-537, pp. 205179 [DOI=https://doi.org/10.1016/j.wear.2023.205179].

Jia Y., Naceur H., Saadlaoui Y., Dubar L., Bergheau J.-M. (2024). A comprehensive comparison of modeling strategies and simulation techniques applied in powder-based metallic additive manufacturing processes. Journal of Manufacturing Processes, 110, pp. 1-29. [IF=6.2] [DOI=https://doi.org/10.1016/j.jmapro.2023.12.048].

Hammami S., La barbera sosa J., Chaari F., Sadat T., Zouari B., Dubar L., Elleuch R. (2024). CuZn40Pb2 brass hot deformation behaviour modelling using Hansel Spittel constitutive model. Advances in Materials and Processing Technologies [DOI=https://doi.org/10.1080/2374068X.2024.2307097].

Dubois A., Filali O., Dubar L. (2023). Effect of roughness, contact pressure and lubrication on the onset of galling of the 6082 aluminium alloy in cold forming, a numerical approach. wear, pp. 205179 [DOI=https://doi.org/10.1016/j.wear.2023.205179].

Zielinski B., Sadat T., Lukic B., Rack A., Markiewicz é., Dubar L. (2023). The morphology and evolution in Al-Cu and Al-Fe magnetic pulse weld interfaces characterized through phase-contrast micro-tomography. Tomography of Materials and Structures, 3, pp. 100018 [DOI=https://doi.org/10.1016/j.tmater.2023.100018].

Zielinski B., Sadat T., Guibert R., Jouaffre D., Markiewicz é., Dubar L. (2023). Interface Morphology Description and Quantification of Al–Cu Magnetic Pulse Welding Joints Using X-Ray Micro-computed Tomography. Journal of Nondestructive Evaluation, 42, pp. 72

Zielinski B., Sadat T., Lukic B., Haugou G., Morvan H., Rack A., Markiewicz é., Dubar L. (2023). Characterization of local mechanical properties of Al/Cu Magnetic Pulse Welded Joints under high strain rates using synchrotron X-Ray Imaging. Materials Letters, 337, ISSN 0167-577X. [IF=3.574] [DOI=https://doi.org/10.1016/j.matlet.2023.133943].

Boungomba H., Moreau P., Sadat T., Dubois R., Dubar M., Dubar L. (2023). Influence of oxide polluted lubricants on friction: Trapping mechanisms. Tribology International, 179 [DOI=https://doi.org/10.1016/j.triboint.2022.108164].

Volz S., Launhardt J., Bay N., Hu C., Moreau P., Dubar L., Nielsen C., Hayakawa K., Kitamura K., Groche P. (2023). International round robin test of environmentally benign lubricants for cold forging. CIRP Annals, 72, pp. 245-250 [DOI=https://doi.org/10.1016/j.cirp.2023.03.019].

Filali O., Dubois A., Moghadam M., Nielsen C., Dubar L. (2022). Numerical prediction of the galling of aluminium alloys in cold strip drawing. Journal of Manufacturing Processes, 73, pp. 340-353. [IF=5.01] [DOI=https://doi.org/10.1016/j.jmapro.2021.11.008].

Serebriakov I., Puchi cabrera E., Dubar L., Moreau P., Meresse D., La barbera sosa J. (2021). Friction analysis during deformation of steels under hot-working conditions. Tribology International, 158. [IF=4.271]

Puchi cabrera E., Guérin J.-D., La barbera sosa J., Dubar M., Dubar L. (2021). Effect of initial grain size on the mechanical behaviour of austenite during deformation under hot-working conditions. Materials Science and Engineering: A [DOI=10.1016/j.msea.2020.139553].

Sadat T., Hayashi K., Haugou G., Morvan H., Markiewicz é., Dubar L., Bigerelle M., Ameyama K., Dirras G. (2021). Mechanical properties of spark plasma sintering-processed pure Ti and Ti-6Al-4V Alloys: a comparative study between harmonic and non-harmonic microstructures. Compouds 2021, 1, pp. (41-57) [DOI=https://doi.org/10.3390/compounds1010005].

Dohda K., Yamamoto M., Hu C., Dubar L., Ehmann K. (2020). Galling phenomena in metal forming. Friction, pp. 1-21, ISSN 2223-7690. [IF=5.29] [DOI=10.1007/s40544-020-0430-z].

Puchi cabrera E., Guérin J.-D., La barbera sosa J., Alvarez-Hostos J., Moreau P., Dubar M., Dubar L. (2020). Friction Correction of Austenite Flow Stress Curves Determined under Axisymmetric Compression Conditions. Experimental Mechanics, 60, pp. 445-458. [IF=2.319] [DOI=10.1007/s11340-019-00492-5].

Octau C., Dbouk T., Watremez M., Meresse D., Lippert M., Schiffler J., Keirsbulck L., Dubar L. (2020). Liquid-solid two-phase jet in a turbulent crossflow: Experiments and simulations. Chemical Engineering Research and Design, 155, pp. 156-171 [DOI=https://doi.org/10.1016/j.cherd.2020.01.004].

Octau C., Meresse D., Watremez M., Schiffler J., Lippert M., Keirsbulck L., Dubar L. (2020). Characterization of particulate matter emissions in urban train braking-An investigation of braking conditions influence on a reduced-scale device. https://doi.org/10.1007/s11356-020-08337-8 [DOI=https://doi.org/10.1007/s11356-020-08337-8].

Moghadam M., Villa M., Moreau P., Dubois A., Dubar L., Nielsen C., Bay N. (2020). Analysis of lubricant performance in punching and blanking. Tribology International, 141, ISSN 0301-679X. [IF=3.517] [DOI=10.1016/j.triboint.2019.105949].

Bertolini R., Bruschi S., Ghiotti A., Haugou G., Morvan H., Dubar L. (2019). Material behaviour at low temperatures for calibrating cryogenic machining numerical simulations. 17th CIRP Conference on Modelling of Machining Operations, 82, pp. 344-349

Le mercier K., Guérin J.-D., Dubar M., Dubar L., Puchi cabrera E. (2019). Physically-based constitutive description of a commercial Al-Mg-Si alloy deformed under cold-warm working conditions. Journal of Alloys and Compounds, 790, pp. 1177-1191 [DOI=https://doi.org/10.1016/j.jallcom.2019.03.113].

Debras C., Dubar L., Dubar M., Hubert C., Dubois A. (2019). Fracture energy based approach for cemented carbides grain debonding. International Journal of Mechanical Sciences, 161, pp. 105038, ISSN 0020-7403. [IF=4.134] [DOI=10.1016/j.ijmecsci.2019.105038].

Puchi cabrera E., Guérin J.-D., La barbera sosa J., Dubar M., Dubar L. (2018). Plausible extension of Anand's model to metals exhibiting dynamic recrystallization and its experimental validation. International Journal of Plasticity, 108, pp. 70-87 [DOI=https://doi.org/10.1016/j.ijplas.2018.04.013].

Groche P., Kramer P., Bay N., Christiansen P., Dubar L., Hayakawa K., Hu C., Kitamura K., Moreau P. (2018). Friction coefficients in cold forging: a global perspective. CIRP Annals Manufacturing Technology, 67, Issue 1. [IF=2.893] [DOI=10.1016/j.cirp.2018.04.106].

Hostos J., Bencomo A., Puchi cabrera E., Guérin J.-D., Dubar L. (2018). Modeling the viscoplastic flow behavior of a 20MnCr5 steel grade deformed under hot-working conditions, employing a meshless technique. International Journal of Plasticity, ISSN 0749-6419. [IF=5.701] [DOI=10.1016/j.ijplas.2018.01.005].

Pruncu C., Pham T., Dubois A., Dubar M., Dubar L. (2018). Morphology of surface integrity as effect of cold forging of aluminum alloy. Tribology Transactions, 61 (4), pp. 632-639. [IF=1.759]

Murillo-Marrodán A., Puchi cabrera E., García E., Dubar M., Cortés F., Dubar L. (2018). An Incremental Physically-Based Model of P91 Steel Flow Behaviour for the Numerical Analysis of Hot-Working Processes. Metals, 8 (4), pp. 269 [DOI=https://doi.org/10.3390/met8040269].

Dubar L., Dubois A., Dubar M. (2018). Friction and Wear in Metal Forming: 25 Years at LAMIH UMR CNRS 8201. Key Engineering Materials, 767, pp. 42-58

Dubar L., Debras C., Dubar M., Dubois A. (2018). Quantitative Evolution of WC-Co Cemented Carbide Tool Surface during the Cold Forming of Steel Parts. Key Engineering Materials, 767, pp. 290-297

Filali O., Dubois A., Dubar L., Dubar M. (2018). Towards the Numerical Prediction of Galling Onset in Cold Forming. Key Engineering Materials, 767, pp. 103-110

Le mercier K., Watremez M., Puchi cabrera E., Dubar L., Guérin J.-D., Fouilland L. (2017). Dynamic recrystallization behaviour of spheroidal graphite iron. Application to cutting operations. Journal of Materials Processing Technology, 239, pp. 315 - 325, ISSN 0924-0136. [IF=2.359]

Hubert C., André D., Dubar L., Iordanoff I., Charles J.-L. (2017). Simulation of continuum electrical conduction and Joule heating using DEM domains. International Journal for Numerical Methods in Engineering, 110, Issue 9, pp. 862-877, ISSN 1097-0207. [IF=2.1]

Pruncu C., Pham T., Dubois A., Dubar M., Dubar L. (2017). Morphology of surface integrity as effect of cold forging of aluminum alloy. tribology transactions. [IF=1.685] [DOI=10.1080/10402004.2017.1386339. ISSN1040-2004].

Puchi cabrera E., Guérin J.-D., La barbera sosa J., Dubar M., Dubar L. (2017). Incremental constitutive description of SAE 5120 steel deformed under hot-working conditions. International Journal of Mechanical Sciences, 133, pp. 619-630, ISSN 0020-7403. [IF=2.884]

Le mercier K., Dubar M., Mocellin K., Dubois A., Dubar L. (2017). Quantitative analysis of galling in cold forging of a commercial Al-Mg-Si alloy. Procedia Engineering, 207, pp. 2298-2303

Puchi cabrera E., Guérin J.-D., La barbera sosa J., Dubar M., Dubar L. (2017). Plausible extension of Anand's model to metals exhibiting dynamic recrystallization and its experimental validation. International Journal of Plasticity, 108, pp. 70-87

Chalon J., Guérin J.-D., Dubar L., Dubois A., Puchi cabrera E. (2016). Characterization of the hot-working behavior of a Cu-Ni-Si alloy. Materials Science and Engineering: Part A, 667, pp. 77 - 86, ISSN 0921-5093. [IF=2.647]

Puchi cabrera E., Guérin J.-D., Dubar M., Dubar L., Dubois A. (2016). A novel approach for modeling the flow stress curves of austenite under transient deformation conditions. Materials Science and Engineering: A, 673, pp. 660-670, ISSN 0921-5093. [IF=2]

Staia M., Dubar L., Dubar M., Puchi cabrera E., Iost A., De baets P., Dubois A. (2016). Mechanical Characterization of a prototype a-C:Cr, Si and its tribological behavior at high temperature. Tribology International, 100, pp. 242-254, ISSN 0301-679X. [IF=2]

Hubert C., Kubiak K., Bigerelle M., Dubois A., Dubar L. (2015). Identification of lubrication regime on textured surfaces by multi-scale decomposition. Tribology International, 82, pp. 375-386, ISSN 0301-679X. [IF=2.124]

García E., Sánchez J., Meresse D., Pombo I., Dubar L. (2014). Complementary tribometers for the analysis of contact phenomena in grinding. Journal of Materials Processing Technology, 214 (9), pp. 1787-1797. [IF=1.953]

Meresse D., Watremez M., Siroux M., Dubar L., Harmand S. (2013). Friction and wear mechanisms of phenolic-based materials on High Speed Tribometer. Journal of Tribology - Transaction of the ASME, 135(3), ISSN 0742-4787. [IF=1.521]

Kubiak K., Bigerelle M., Mathia T., Dubois A., Dubar L. (2013). Dynamic evolution of interface roughness during friction and wear processes. Scanning, 36 (1), pp. 30-38, ISSN 1932-8745. [IF=1.067]

Dubar L., Hubert C., Christiansen P., Bay N., Dubois A. (2012). Analysis of fluid lubrication mechanisms in metal forming at mesoscopic scale. CIRP Annals - Manufacturing Technology, 61, pp. 271–274, ISSN 0007-8506. [IF=1.708]

Heussaff A., Dubar L., Tison T., Watremez M., Nunes R. (2012). A methodology for the modelling of the variability of brake lining surfaces. Wear, 289, pp. 145-159, ISSN 0043-1648. [IF=1.262]

Hubert C., Dubar L., Dubar M., Dubois A. (2012). Finite Element simulation of the edge-trimming/cold rolling sequence: Analysis of edge cracking. Journal of Materials Processing Technology, 212(5), pp. 1049–1060, ISSN 0924-0136. [IF=1.567]

Meresse D., Harmand S., Siroux M., Watremez M., Dubar L. (2012). Experimental disc heat flux identification on a reduced scale braking system using the inverse heat conduction method. Applied Thermal Engineering, 48, pp. 202-210, ISSN 1359-4311. [IF=2.064]

Watremez M., Meresse D., Dubar L., Brocail J. (2012). Finite element modelling of orthogonal cutting: sensitivity analysis of material and contact parameters. International Journal of Simulation and Process Modelling, 7, pp. 262-274, ISSN 1740-2131

Hubert C., Dubar L., Dubar M., Dubois A. (2011). Strategy of simulation of the edge-trimming/cold colling sequence: numerical study of edge cracking. Steel Research International, pp. 87-92, ISSN 1611-3683. [IF=0.73]

Hubert C., Dubar L., Dubar M., Dubois A., Lauro F., Morin D. (2011). A non-associative flow rate formulation for Lemaitre's damage model. Steel Research International, pp. 889-894, ISSN 1611-3683. [IF=0.73]

Vidal-Salle E., Dubois A., Dubar M., Dubar L., Boyer J. (2011). Experimental identification and validation of the plastic wave approach in hot forging of steels. Wear, 286-287, pp. 35-44, ISSN 0043-1648. [IF=1.072]

Deltombe R., Belotserkovets A., Dubar M., Dubois A., Dubar L. (2011). Local approach strategy to predict final roughness in cold rolling of stainless steel strip. Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 225(9), pp. 887-893, ISSN 1350-6501. [IF=0.733]

Hubert C., Dubar L., Dubar M., Dubois A. (2010). Experimental simulation of strip edge cracking in steel rolling sequences. Journal of Materials Processing Technology, 210(12), pp. 1587-1597, ISSN 0924-0136. [IF=1.42]

Brocail J., Watremez M., Dubar L. (2010). Identification of a friction model for modelling of orthogonal cutting. International Journal of Machine Tools & Manufacture, 50, pp. 807-814, ISSN 0890-6955. [IF=1.956]

Bourouga B., Guillot E., Garnier B., Dubar L. (2010). Experimental study of thermal sliding contact parameters at interface seat of large strains. International Journal of Material Forming, 3, pp. 821-824, ISSN 1960-6206

Vidal-Salle E., Dubar M., Boyer J., Dubar L. (2010). Experimental study of thermal sliding contact parameters at interface seat of large strains. International Journal of Material Forming, 3, pp. 315-318, ISSN 1960-6206

Louaisil K., Dubar M., Deltombe R., Dubois A., Dubar L. (2009). Analysis of interface temperature, forward slip and lubricant influence on friction and wear in cold rolling. Wear, 266, pp. 119-128, ISSN 0043-1648. [IF=1.48]

Szczurek E., Dubar M., Deltombe R., Dubois A., Dubar L. (2009). New approach to the evaluation of the free surface position in roll coating. Journal of Materials Processing Technology, 209, pp. 3187-3197, ISSN 0924-0136. [IF=1.42]

Belotserkovets A., Deltombe R., Dubar M., Dubar L., Dubois A., Vandekinderen H., Damasse J. (2009). Roughness prediction during cold rolling of stainless steel strip: fluid structure approach. International Journal of Material Forming, 2, pp. 21-24, ISSN 1960-6206

Hubert C., Dubar M., Dubois A., Dubar L. (2009). 3D modeling of edge trimming process. International Journal of Material Forming, 2, pp. 837-840, ISSN 1960-6206

Belotserkovets A., Dubois A., Dubar M., Dubar L., Deltombe R., Vandekinderen H., Damasse J. (2008). 2D asperity deformation of stainless steel strip in cold rolling. International Journal of Material Forming, 1, pp. 351-354, ISSN 1960-6206

Zhang Q., Arentoft M., Bruschi S., Dubar L., Felder E. (2008). Measurement of friction in a cold extrusion operation: Study by numerical simulation of four friction tests. International Journal of Material Forming, 1, pp. 1267-1270, ISSN 1960-6206

Brocail J., Watremez M., Dubar L., Bourouga B. (2008). Contact and friction analysis at tool-chip interface to high-speed machining. International Journal of Material Forming, 1, pp. 1407-1410, ISSN 1960-6206

Guillot E., Bourouga B., Garnier B., Dubar L. (2008). Estimation of thermal contact parameters at a worpiece-tool interface in a HSM process. International Journal of Material Forming, 1, pp. 1031-1034, ISSN 1960-6206

Louaisil K., Dubar M., Deltombe R., Dubois A., Dubar L. (2008). Simulation of interface temperature and control of lubrication in the study of friction and wear in cold rolling. International Journal of Material Forming, 1, pp. 1239-1242, ISSN 1960-6206

Daouben E., Dubois A., Dubar M., Dubar L., Deltombe R., Truong dinh N., Lazzarotto L. (2008). Effects of lubricant and lubrication parameters on friction during hot steel forging. International Journal of Material Forming, 1, pp. 1223-1226, ISSN 1960-6206

Szczurek E., Dubar M., Deltombe R., Dubois A., Dubar L. (2007). Towards the mastering of the free surface position in roll coating. key engineering materials, 344, pp. 955-962, ISSN 1013-9826

Dubar L., Dubois A., Dubar M. (2006). Friction and wear phenomena in cold metal forming: an integrated approach. Journal of engineering manufacture, 220, pp. 1-10, ISSN 0954-4054

Dubar M., Huart S., Deltombe R., Dubois A., Dubar L. (2006). Cold rolling of galvanized strips: A new approach to the evaluation of zinc fines formation. Journal of Materials Processing Technology, 177, pp. 505-508, ISSN 0924-0136

Dubar M., Dubar L., Dubois A. (2005). Wear analysis of tools in cold forging: PVD versus CVD TiN coatings. Wear, 259, pp. 1109-1116, ISSN 0043-1648

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2004). Asperity deformation, lubricant trapping and iron fines formation mechanism in cold rolling processes. wear, 257, pp. 471-480, ISSN 0043-1648

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2004). A methodology to identify behaviour of galvanised coating: an application to the skin passed steel strip. Steel Grips, 2, pp. 521-525

Deltombe R., Dubar M., Dubois A., Dubar L. (2003). A New Methodology To Analyse Iron Fines During Steel Cold Rolling Processes. Wear, 254, pp. 211-221, ISSN 0043-1648

Hivart P., Hauw B., Dubar L., Bricout J.-P. (2003). Numerical identification of bulk behavior law of manganese phosphate coatings. Comparison with tribological properties. Journal of Coatings Technology, 75, pp. 37-44, ISSN 0361-8773

Depuiset B., Deltombe R., Dubar L., Viellard L., Laisne G., Freudenreich P., Braganca P. (2003). Méthodologie d'optimisation de la lubrification et de la propreté de bande sur laminoir réversible. Revue de Métallurgie, pp. 174-175

Verleene A., Dubar L., Dubois A., Dubar M., Oudin J. (2002). Hardening Behaviour Law Versus Rigid Perfectly Plastic Law: Application To A Cold Forging Tool Steel. International Journal Of Plasticity, 18, pp. 997-1011

Dubois A., Lazzarotto L., Dubar L., Oudin J. (2002). A Multi Step Evaluation Strategy For Wire Drawing-Extrusion-Cold Heading Sequence. Wear, 249, pp. 951-961

Dubar L., Hauw B., Dubois A., Oudin J. (2001). Numerical identification of coating bulk behaviour in metal forming. Computers & Structures, 79, pp. 1027-1037

Dubar M., Dubar L., Dubois A., Verleene A., Oudin J. (2001). Wear Criteria of Cold Forging Tool. Surface Engineering, 17, pp. 119-122

Verleene A., Dubar M., Dubar L., Dubois A., Oudin J. (2000). Determination of a hardening behaviour law for a cold forging TiN coated tool steel. Surface and Coating Technology, 127, pp. 52-58

Hauw B., Dubar L., Dubois A., Oudin J. (1999). Mechanical behaviour of surface coatings in sheet metal forming. International Sheet Metal Review, 94, pp. 23-29

Hauw B., Dubar L., Oudin J. (1999). Improvement of stamping computation by means of coating bulk behaviour identification, application to galvanized sheets. Journal of Material Processing Technology, 94, pp. 23-29

Lazzarotto L., Maréchal C., Dubar L., Dubois A., Oudin J. (1999). The effects of processing bath parameters on the quality and performance of zinc phosphate stearate coating. Surface and Coating Technology, 122, pp. 94-100

Dubar L., Bricout J.-P., Wierre C., Meignan P. (1998). New surface processings for cold forging of steels. Surface and Coatings Technology, 102, pp. 157-169

Dubar L., Dubois A., Bricout J.-P., Oudin J. (1998). Stress strain curves at near surface of zinc phosphate coated steel. Surface Engineering, 14, pp. 229-233

Lazzarotto L., Dubar L., Dubois A., Ravassard P., Bricout J.-P., Oudin J. (1998). A selection methodology for lubricating oils in cold metal forming processes. Wear, 211, pp. 1-9

Lazzarotto L., Dubar L., Dubois A., Ravassard P., Oudin J. (1998). Three selection criteria for the cold metal forming lubricating oils containing extreme pressure agents. Journal of Material Processing Technology, pp. 245-250

Lazzarotto L., Dubois A., Dubar L., Verleene A., Oudin J. (1998). Testing of zinc phosphate-stearate coating according to true conditions of contact in wire drawing. Surface Engineering, 14, pp. 335-338

Lazzarotto L., Dubar L., Dubois A., Ravassard P., Oudin J. (1997). Identification of Coulomb's friction coefficient in real contact conditions applied to a wire drawing process. Wear, 211, pp. 54-63

Dubois A., Dubar L., Picart P., Oudin J. (1996). Identification of the bulk behavior in the near-contact-surface of steel workpieces. Journal of Materials Engineering , & Performance, 5, pp. 734-742

Dubois A., Dubar L., Dubar M., Oudin J. (2000). Caractérisation du frottement outil-pièce en mise en forme à l'ambiante des aciers. Mécanique & Industries, 6, pp. 639-649

Maréchal C., Dubois A., Dubar L., Oudin J. (1999). Le test d'indentation Brinell : un processus de contrôle des couches phosphatées savonnées pour le revêtement lubrifiant des outils de la frappe à froid. Matériaux & Techniques, pp. 15-21

Verleene A., Dubar L., Dubois A., Ravassard P., Oudin J. (1999). Méthodologie d'étude de la dégradation des outillages de frappe à froid. Matériaux et Techniques, pp. 1-5

Hauw B., Dubar L., Dubois A., Oudin J. (1998). Comportement mécanique des revêtements de surface en forge à froid. J. de Physique IV, 4, pp. 243-248

Dubar L., Dubois A., Oudin J., Bricout J.-P. (1996). Comportement mécanique en surface des produits revêtus destinés à la mise en forme. Revue de la Métallurgie, Hors série SF2M Journées d'Automne, 1, pp. 158-168

Dubois A., Dubar L., Picart P., Oudin J. (1995). Contribution à la caractérisation du frottement lors de la mise en forme de pièces en acier revêtu. Métaux-Déformation, 6, pp. 14-21

Dubar L., Dubois A., Dubar M. (2015). 60 Excellent Inventions in Metal Forming. Friction Analysis in Bulk Metal Forming, Springer, pp. AE. Tekkaya, W. Homberg, A. Brosius, ISBN 978-3-662-46311-6, 978-3-662-46312-3 (eBook) [DOI=10.1007/978-3-662-46312-3].

Soranansri P., Dubois A., Moreau P., Dubar L. (2023). Consideration of Pile-Up Material on Identification of Friction Coefficient in Aluminum Forming Processes of High Temperature. 14th International Conference on the Technology of Plasticity, Mandelieu - La Napoule (France), septembre . [DOI=https://doi.org/10.1007/978-3-031-41341-4_30].

Yahya F., Hubert C., Leconte N., Dubar L. (2023). FEM/DEM adaptive remeshing strategy. 14th International Conference on the Technology of Plasticity, Mandelieu - La Napoule (France), septembre .

Boualem N., Dubar M., Moreau P., Dubar L., Bristiel P. (2023). Influence of forming cycles on the mechanical properties and tribological behavior of hot forging tools. ICTP 2023 - The 14th International Conference on the Technology of Plasticity, septembre .

Zielinski B., Sadat T., Dubois R., La barbera sosa J., Collin C., Lilensten L., Jouaffre D., Markiewicz é., Dubar L. (2023). Interface Characterization by Nanoindentation and EBSD of Cu/Cu and Al/Cu Joints Produced by Magnetic Pulse Welding (MPW). International Conference on the Technology of Plasticity, france, pp. 53-63, septembre .

Soranansri P., Dubois A., Moreau P., Dubar L. (2023). Check for updates Consideration of Pile-Up Material on Identification of Friction Coefficient in Aluminum Forming Processes at High. Proceedings of the 14th International Conference on the Technology of Plasticity-Current Trends in the Technology of Plasticity: ICTP 2023, France, janvier .

Hu C., Volz S., Groche P., Moreau P., Launhardt J., Benabbou N., Saito S., Chen H., Kitamura K., Dubar L. (2022). Modeling of friction in cold forging considering a wide range of tribological Conditions. 55th ICFG Plenary Meeting, Milan (Italy), septembre .

Yahya F., Hubert C., Leconte N., Dubar L. (2022). Adaptive coupled discrete/continuous approach for the forming of materials. 14th International Conference on Computational Structures Technology, Montpellier (France), août .

Zielinski B., Sadat T., Jouaffre D., Dubois R., Kossman S., Dubar L., Markiewicz é. (2021). A Micro-mechanical and Microstructural Analysis at the Joint Interface Between Dissimilar Materials in Magnetic Pulse Welding (MPW). ICHSF21, Dortmund, Germany, octobre .

Boungomba H., Dubar M., Dubar L., Moreau P., Sadat T. (2021). Innovative simulation strategy for the mastering of tribological surface transformations. ICTP 2021- The 13th International Conference on the Technology of Plasticity, juillet .

Dubar L., Dubar M., Dubois A. (2021). Current situation of light metal manufacturing in Europe. 1st GRGLMM International Symposium, Toyama Japan, janvier .

Hammami S., La barbera sosa J., Chaari F., Sadat T., Zouari B., Dubar L., Elleuch R. (2021). Preliminary Thermo-mechanical Characterization of Brass Alloys. International Conference Design and Modeling of Mechanical Systems, janvier .

Boubakri C., Dubar L., Watremez M., Meresse D., Hubert C., Nouari M., Wolff C., Moufki A. (2020). Modeling and experimentation of microcontact tool/chip during the micromachining process. 13th International Conference on the Technology of Plasticity (ICTP 2020), Ohio, USA, juillet .

Boubakri C., Wolff C., Nouari M., Moufki A., Dubar L., Watremez M., Hubert C. (2019). Micromachining simulation using a crystal plasticity model: ALE and CEL approaches. 22nd International Conference on Material Forming (ESAFORM 2019), Vitoria-Gasteiz, Spain, mai . [DOI=10.1063/1.5112625].

Octau C., Lippert M., Graziani A., Watremez M., Keirsbulck L., Dubar L., Dbouk T. (2017). Particles Transport in Railway Braking Systems: An Experimental and Numerical Investigation. ASME Proceedings | 15th International Symposium on Gas and Liquid-Solid Two-Phase Flows, juillet . [DOI=10.1115/FEDSM2017-69126].

Le mercier K., Dubar M., Mocellin K., Dubois A., Dubar L. (2017). Quantitative analysis of galling in cold forging of a commercial Al-Mg-Si alloy. Procedia Engineering, 207, Cambridge (Angleterre), pp. 2298-2303, janvier .

Puchi cabrera E., Staia M., Guérin J.-D., Iost A., Dubar L. (2016). Mechanical characterization of coated systems involving multilayer films. , janvier .

Watremez M., Le mercier K., Meresse D., Dubar L. (2015). Identification of advanced frictional laws in severe contact. 10th International Conference on Advances in Experimental Mechanics, Edinburgh, Scotland, septembre .

Hubert C., Dubois A., Dubar L., Laugier M., Legrand N., Boman R., Ponthot J.-P., Carretta Y. (2015). Complementary approaches for the numerical simulation of the Micro-Plasto-Hydrodynamic Lubrication regime. ESAFORM 2015, 651-653, Key Engineering Materials, Graz, Austria, pp. 492-497, avril .

Debras C., Dubois A., Dubar M., Dubar L. (2015). Towards a fracture energy based approach for wear prediction of WC-Co tools in industrial cold heading process. ESAFORM 2015, 651-653, Key Engineering Materials, Graz, Austria, pp. 486-491, avril .

Senecaut Y., Watremez M., Brocail J., Fouilland L., Dubar L. (2015). Dynamic recrystallization observed at the tool/chip interface in machining. ESAFORM 2015, 651-653, Key Engineering Materials, Graz, Austria, pp. 1223-1228, avril . [DOI=doi:10.4028/www.scientific.net/KEM.651-653.1223].

Le mercier K., Watremez M., Fouilland L., Dubar L. (2015). Dynamic recrystallization of spheroidal graphite iron during hot cutting operations. ESAFORM 2015, 651-653, Key Engineering Materials, Graz, Austria, pp. 1235-1240, avril . [DOI=doi:10.4028/www.scientific.net/KEM.651-653.1235].

Dubois A., Dubar M., Dubar L. (2014). Warm and hot upsetting sliding test: tribology of metal processes at high temperature. Procedia Engineering, ICTP 2014, 81, Nagoya, Japan, pp. 1964-1969, octobre ., ISBN 1877-7058 [DOI=10.1016/j.proeng.2014.10.265].

Dubar L., Pruncu C., Dubois A., Dubar M. (2014). Effects of contact pressure, plastic strain and sliding velocity on sticking in cold forging of aluminium billet. Procedia Engineering, ICTP 2014, 81, Nagoya, Japan, pp. 1842 – 1847, octobre ., ISBN 1877-7058 [DOI=10.1016/j.proeng.2014.10.243].

Dubois A., Luc é., Dubar M., Dubar L., Thibaut C., Damasse J. (2014). Initiation of sticking during hot rolling of stainless steel plate. Procedia Engineering, ICTP 2014, 81, Nagoya, Japan, pp. 1958 – 1963, octobre ., ISBN 1877-7058 [DOI=10.1016/j.proeng.2014.10.264].

Hubert C., Kubiak K., Bigerelle M., Dubar L. (2014). Identification of local lubrication regimes on textured surfaces by 3D roughness curvature radius. Advanced Materials Research, 966-967, Peter Groche, Darmstadt, Germany, pp. 120-125, juin ., ISBN 978-3-03835-127-6 [DOI=10.4028/www.scientific.net/AMR.966-967.120].

Le mercier K., Watremez M., Brocail J., Dubar L. (2014). Evolution of dynamic recrystallization of aisi-1045 steel under critical friction conditions. Advanced Materials Research (ICTMP 2014), 966-967, Peter Groche, Darmstadt, Germany, pp. 168-174, juin ., ISBN 1662-8985 [DOI=doi:10.4028/www.scientific.net/AMR.966-967.168].

Le mercier K., Watremez M., Fouilland L., Guérin J.-D., Dubar L. (2014). Thermo-Mechanical Behaviour of Spheroidal Graphite Iron. Key Engineering Materials (ESAFORM 2014), 611-612, Jari Larkiola, Espoo, Finland, pp. 1250-1257, mai ., ISBN 1662-9795 [DOI=doi:10.4028/www.scientific.net/KEM.611-612.1250].

Senecaut Y., Watremez M., Brocail J., Dubar L. (2014). Identification Of Friction Law To Model Orthogonal Cutting. Key Engineering Materials (ESAFORM 2014), 611-612, Jari Larkiola, Espoo, Finland, pp. 1197-1201, mai ., ISBN doi:10.4028/www.scientific.net/KEM.611-612.1194 [DOI=doi:10.4028/www.scientific.net/KEM.611-612.1194].

García E., Sanchez J., Pombo I., Dubar L., Dubar M., Dubois A., Ortega N., Izquierdo B., Plaza S., Meresse D., Harmand S. (2014). Evaluation of friction and wear effects during the abrasive contact between Al2O3-hardened steel. MESIC5 – Manufacturing Engineering Society International Conference 2013, Zaragoza, Spain, janvier .

Hubert C., Kubiak K., Bigerelle M., Dubois A., Dubar L. (2013). Identification of lubrication regime on textured surfaces by multi-scale decomposition. TriboLyon 2013 - 40th Leeds-Lyon Symposium on Tribology & Tribochemistry, Lyon, France, septembre .

Dubar L., Hubert C., Dubois A., Dubar M. (2013). Coupled numerical simulation in the vicinity of surfaces in the field of metal forming. Coupled Problems 2013, Ibiza, Spain, juin .

Senecaut Y., Watremez M., Meresse D., Dubar L. (2013). Implementation of advanced frictional for modelling of high speed machining. ESAFORM 2013, 554-557, Aveiro, Portugal, pp. 2021-2028, avril ., ISBN 1662-9795

Luc é., Dubar M., Dubois A., Hermant A., Damasse J., Dubar L. (2012). Study of tribological oxide layer behaviour during the hot rolling of ferritic stainless steels. 30th Journées Sidérurgiques Internationales, Paris, décembre .

Heussaff A., Dubar L., Tison T., Nunes R. (2012). Modelling of the variability aspect of linings and its impact on the squealing behaviour of an automotive brake system. Proceedings of uncertainty in structural dynamics conference (USD2012), Leuven (Belgium), septembre .

Heussaff A., Nunes R., Dubar L., Tison T. (2012). Brake squeal modelling assuming variability aspect of linings. Europe's braking technology conference & exhibition - EuroBrake 2012, Dresden, Germany, avril .

Meresse D., Watremez M., Dubar L., Siroux M., Harmand S. (2012). Modelling reinforcement debonding in braking conditions for simplified phenolic matrix material. International Conference Eurobrake 2012, FISITA, Dresden, Allemagne, avril .

Meresse D., Watremez M., Harmand S., Dubar L. (2012). Determination of heat repartition parameters on high speed pin-on-disc tribometer by inverse heat conduction method. ESAFORM 2012, 504 - 506, Key Engineering Materials, Erlangen, Allemagne, pp. 1061-1066, février ., ISBN 1662-9795

Hubert C., Dubar L., Dubar M., Dubois A. (2011). Strategy of simulation of the edge-trimming/cold colling sequence: numerical study of edge cracking. ICTP 2011, Aachen, Germany, septembre .

Hubert C., Dubar L., Dubar M., Dubois A., Lauro F., Morin D. (2011). A non-associative flow rate formulation for Lemaitre's damage model. ICTP 2011, Aachen, Germany, septembre .

Hubert C., Bay N., Christiansen P., Deltombe R., Dubar L., Dubar M., Dubois A. (2011). Numerical simulation of lubrication mechanisms at mesoscopic scale. ESAFORM 2011, 1353, AIP Conference Proceedings, Belfast, Northern Ireland, pp. 1729-1734, avril ., ISBN 978-0-7354-0911-8

Meresse D., Watremez M., Siroux M., Dubar L., Harmand S. (2011). Friction and wear mechanisms study on a newly developed High Speed Tribometer. ESAFORM 2011, 1353, AIP Conference Proceedings, Belfast, Northern Ireland, pp. 1759-1764, avril ., ISBN 978-0-7354-0911-8

Meresse D., Siroux M., Watremez M., Harmand S., Dubar L. (2011). Estimation of three-dimensional distribution of heat flux on the pin frictional surface during a pin on disc test. ESAFORM 2011, 1353, AIP Conference Proceedings, Belfast, Northern Ireland, pp. 1137-1142, avril ., ISBN 978-0-7354-0911-8

Watremez M., Dubar L., Brocail J. (2011). New approach of frictional behaviour for modelling of high speed machining. ESAFORM 2011, 1353, AIP Conference Proceedings, Belfast, Northern Ireland, pp. 1788-1793, avril ., ISBN 978-0-7354-0911-8

Meresse D., Watremez M., Siroux M., Dubar L., Harmand S. (2010). Thermal study of pin on disc sliding contact in automotive braking conditions. JEF 2010, Lille, France, novembre .

Brocail J., Watremez M., Dubar L. (2010). identification and implementation of new friction model in the finite element model of orthogonal cutting. international conference advances in materials and processing technologies, Paris, France, octobre .

Hubert C., Dubar L., Dubar M., Dubois A. (2010). Strip edge cracking simulation in cold rolling. Francisco Chinesta, Laboratoire de Mecanique des Systemes et Procedes Yvan Chastel, Center for Material Forming-CEMEF Mohamed El Mansori, Mechanical Engineering and Manufacturing Research Group, AMPT 2010, 1315, AIP Conference Proceedings, Paris, F, pp. 551-556, octobre ., ISBN 978-0-7354-0871-5

Deltombe R., Dubar M., Dubois A., Dubar L. (2010). Toward Oxide Scale Behavior Management At High Temperature. Francisco Chinesta, Laboratoire de Mecanique des Systemes et Procedes Yvan Chastel, Center for Material Forming-CEMEF Mohamed El Mansori, Mechanical Engineering and Manufacturing Research Group, AMPT, 1315, AIP Conference Proceedings, Paris, F, pp. 793-798, octobre ., ISBN 978-0-7354-0871-5

Brocail J., Watremez M., Dubar L. (2010). Sensitive analysis of a finite element model of orthogonal cutting. Francisco Chinesta, Yvan Chastel, Mohamed El Mansori, AMPT, 1315, AIP Conference Proceedings, Paris, France, pp. 1047-1052, octobre ., ISBN 978-0-7354-0871-5. [IF=0.00000001]

Vandekinderen H., Dubar L., Deltombe R., Damasse J. (2010). Back-calculation of friction during cold rolling of stainless steels and its influence on surface quality. Eric FELDER, Pierre MONTMITONNET, Tribology of Manufacturing Processes: Proceedings of the 4th International Conference on Tribology in Manufacturing Processes, 2, presse des mines, Nice (France), pp. 769-779, juin ., ISBN 978-2911256-27-1

Deltombe R., Belotserkovets A., Dubar M., Dubois A., Dubar L. (2010). Local approach strategy to the roughness prediction of stainless steel strip. Eric FELDER, Pierre MONTMITONNET, Tribology of Manufacturing Processes: Proceedings of the 4th International Conference on Tribology in Manufacturing Processes, 2, Presse des mines, Nice (France), pp. 809-819, juin ., ISBN 978-2-911256-27-1

Vigneron L., Vidal-Salle E., Boyer J., Dubar M., Dubar L. (2010). Experimental validation of the plastic wave approach in hot forging of steels. Eric FELDER, Pierre MONTMITONNET, Tribology of Manufacturing Processes: Proceedings of the 4th International Conference on Tribology in Manufacturing Processes, 2, Presse des mines, Nice (France), pp. 385-397, juin ., ISBN 978-2-911256-27-1

Brocail J., Watremez M., Dubar L. (2010). Friction analysis for modelling of high speed machining. HSM 2010 (8th International Conference on High Speed Machining), Enim Editions, Metz, France, pp. 127-132, avril ., ISBN 978-2-9534170-2-9

Hubert C., Dubar M., Dubois A., Dubar L. (2009). 3D modeling of edge trimming process. ESAFORM 2009, Boisse P., Enschede, The Netherlands, avril .

Belotserkovets A., Deltombe R., Dubar M., Dubar L., Dubois A., Vandekinderen H., Damasse J. (2009). ROUGHNESS PREDICTION DURING COLD ROLLING OF STAINLESS STEEL STRIP: FLUID STRUCTURE APPROACH. ESAFORM 2009, P. Boisse, Twente, avril .

Hubert C., Dubar M., Dubois A., Dubar L. (2008). Finite element simulation of edge trimming: comparison between failure criteria and damage model. Metal Forming 2008, 2, M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, J. Lin, K. Mori, Cracovie, pp. 389-396, septembre ., ISBN 978-3-514-00754-3

Louaisil K., Dubar M., Deltombe R., Dubois A., Dubar L. (2008). Role of the different lubricant constituents on friction and wear in cold rolling. Metal forming, 2, M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, J. Lin, K. Mori, Cracovie, pp. 94-101, septembre ., ISBN 978-3-514-00754-3

Zhang Q., Felder E., Arentoft M., Paldan N., Dubar L., Borsetto F., Bruschi S. (2008). RESULTS OF FRICTION BENCHMARK IN COLD FORGING CONDITION. Proceedings of the 12 th International Conference on Metal Forming 2008, 1, kracow (Polska), pp. 2, septembre .

Guillot E., Bourouga B., Garnier B., Dubar L. (2008). Estimation of thermal contact parameters at a worpiece-tool interface in a HSM process. P. Boisse, ESAFORM 2008, Lyon, pp. 9-12, avril .

Belotserkovets A., Dubois A., Dubar M., Dubar L., Deltombe R., Vandekinderen H., Damasse J. (2008). 2D asperity deformation of stainless steel strip in cold rolling. P. Boisse, ESAFORM 2008, Lyon, pp. 13-16, avril .

Brocail J., Watremez M., Dubar L., Bourouga B. (2008). Contact and friction analysis at tool-chip interface to high-speed machining. P. Boisse, ESAFORM 2008, Lyon, France, pp. 1-4, avril .

Zhang Q., Arentoft M., Bruschi S., Dubar L., Felder E. (2008). Measurement of friction in a cold extrusion operation: Study by numerical simulation of four friction tests. P. Boisse, ESAFORM 2008, Lyon, pp. 57-60, avril .

Louaisil K., Dubar M., Dubois A., Deltombe R., Dubar L. (2008). Simulation of interface temperature and control of lubrication in the study of friction and wear in cold rolling. P. Boisse, ESAFORM 2008, Lyon, pp. 29-32, avril .

Daouben E., Dubois A., Dubar M., Dubar L., Deltombe R., Truong dinh N., Lazzarotto L. (2008). Effects of lubricant and lubrication parameters on friction during hot steel forging. P. Boisse, ESAFORM 2008, pp. 13-16, avril .

Brocail J., Watremez M., Deltombe R., Dubar L. (2007). Analyse des conditions de contact et de frottement à l'interface outil/copeau en usinage grande vitesse. HSIMP, Senlis, France, novembre ., ISBN 978-2-85400-812-X

Watremez M., Brocail J., Dubar L. (2007). Thermomechanical behaviour of coated brake discs with improved surface geometry. 21st International Conference on Surface Modification Technologies – SMT 21, Paris, France, pp. 227-234, septembre ., ISBN 978-0-9817065-0-4

Szczurek E., Dubar M., Deltombe R., Dubois A., Dubar L. (2007). Towards the mastering of the free surface position in roll coating. In F. Micari, M. Geiger, J. Duflou, B. Shirvani, R. Clarke, R. Di Lorenzo, L. Fratini, Sheet metal 2007, Palermo, pp. 955-962, avril ., ISBN 0-87849-437-5

Guillot E., Bourouga B., Garnier B., Dubar L. (2007). Experimental Study Of Thermal Sliding Contact With Friction: Application To High Speed Machining Of Metallic Materials. Zaragoza, ESAFORM 2007, Zaragoza, pp. 1263-1268, avril ., ISBN 978-0-7354-0414-4

Daouben E., Dubar L., Dubar M., Deltombe R., Dubois A., Truong dinh N., Lazzarotto L. (2007). Friction and wear in hot forging of steels. E. Cueto, F. Chinesta, ESAFORM 2007, Zaragoza, pp. 527-534, avril ., ISBN 978-0-7354-0414-4

Brocail J., Watremez M., Dubar L., Bourouga B. (2007). High Speed Machining: A New Approach To Friction Analysis At Tool-Chip Interface. E. Cueto, F. Chinesta, ESAFORM 2007, Zaragoza, Espagne, pp. 685-690, avril ., ISBN 978-0-7354-0414-4

Dubar M., Huart S., Deltombe R., Dubois A., Dubar L. (2006). Cold rolling of galvanized strips: a new approach to the evaluation of zinc fines formation. P. Hartley, J. Majta, M. Pietrzyk, J. Lin, M. Jolly, 11th International Conference on METAL FORMING, Birmingham, pp. 505-508, septembre .

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2006). Mastering of surface aspect: application to cold rolling of galvanized strips. N. Juster, A. Rosochowski, 9th International Conference on Material Forming – ESAFORM 2006, Glasgow, pp. 275-278, avril ., ISBN 83-89541-68-8

Dubar M., Huart S., Deltombe R., Dubois A., Dubar L. (2006). Predictive formation of zinc fines during the cold rolling of galvanized strips. N. Juster, A. Rosochowski, 9th International Conference on Material Forming – ESAFORM 2006, Glasgow, pp. 151-154, avril ., ISBN 83-89541-68-8

Dubar M., Dubois A., Deltombe R., Dubar L. (2005). Simulation of bulk forming processes: influence of reliable material data near the contact zone on computational accuracy. D.R.J. Owen, E. Onate, B. Suarez, Computational plasticity COMPLAS VIII, 1, CIMNE, Barcelone (Espagne), pp. 404-407, septembre ., ISBN 84-95999-78-1

Dubar M., Dubar L., Dubois A. (2005). Wear analysis of tools in cold forging: PVD versus CVD TiN coatings. Ian Hutchings, 15 th international conference on wear of materials, 259, elsevier, San Diego, USA, pp. 1109-1116, avril ., ISBN 0043-1648

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2004). A methodology to identify behaviour of galvanised coating: an application to the skin passed steel strip. 10th International Conference Metal Forming 2004, J. Kusiak, P. Hartley, J. Majta, I. Pillinger, M. Pietrzyk, Krakow (Poland), pp. 521-525, septembre ., ISBN 3-937057-08-0

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2004). Skin-pass of galvanised strips: mastering of contact conditions to optimise the process. ICTMP 2004, N. Bay, Nyborg (Denmark), pp. 747-754, juin ., ISBN 87-91035-12-0

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2004). Galvanised coating bulk behaviour: An application to the skin-passed strip. 4th International Conference of THE Coatings,, K.D. Bouzakis, B. Denkena, M. Geiger, H.K. Toenshoff, Fr. W. Bach and U. Popp, Erlangen (Germany), pp. 365-374, avril .

Deltombe R., Huart S., Dubar M., Dubar L. (2004). From Iron fines pollution to wrenching phenomena. 7th ESAFORM 2004, S. Storen, Trondheim Norway), pp. 253-256, janvier ., ISBN 82-92499-02-04

Deltombe R., Morgado N., Dubar M., Dubois A., Dubar L. (2004). Hot Forming of aluminium: a new methodology to identify friction parameters. 7th ESAFORM 2004, S. Storen, Trondheim, (Norway), pp. 253-256, janvier .

Deltombe R., Szczurek E., Dubois A., Dubar L. (2004). ). From schemes optimization to roll fatigue phenomena: global cold rolling mill enhancements. 7th ESAFORM 2004, S Storen, Trondheim (Norway), pp. 249-252, janvier ., ISBN 87-91035-12-0

Dubar L., Dubois A., Dubar M. (2004). Friction and wear phenomena in cold metal forming: an integrated approach. ICTMP 2004, N. Bay, Nyborg (Denmark), pp. 325-338, janvier ., ISBN 87-91035-12-0.

Dubois A., Deltombe R., Dubar M., Dubar L. (2004). Warm drawing simulation of 6060 T6 aluminium: a new way to identify friction parameters. ICTMP 2004, N. Bay, Nyborg (Denmark), pp. 569-575, janvier ., ISBN 87-91035-12-0

Depuiset B., Deltombe R., Dubar L., Viellard L., Laisne G., Freudenreich P., Braganca P. (2003). Méthodologie d'optimisation de la lubrification et de la propreté de bande sur laminoir réversible. International Steel Making Conference, La Revue de Métallurgie, Paris (France), pp. 174-175, décembre .

Deltombe R., Dubar M., Dubois A., Dubar L. (2003). New investigation on cold rolled strip cleanliness. U.P. Singh, M. Geiger, H.J.J. Kals, B. Shirvani, Sheet Metal 2003, Louvain (belgique), pp. 156-166, janvier ., ISBN 1-85923-171-3

Deltombe R., Dubar M., Dubois A., Dubar L. (2002). Iron fines mechanism during steel cold rolling process: strip cleanliness improvements. Euromech 435 colloquium, Simulation of Friction and Wear in Metal Forming, Valenciennes, France, juin .

Dubois A., Dubar M., Dubar L., Oudin J. (2002). Identification of friction condition according to realistic conditions of contact in a multi-step process. Euromech 435 colloquium, Simulation of Friction and Wear in Metal Forming, Valenciennes, France, juin .

Dubar M., Dubar L., Dubois A., Oudin J. (2002). TiN coating in cold forging, a new way to monitor wear. Euromech 435 colloquium, Simulation of Friction and Wear in Metal Forming, Valenciennes, France, juin .

Dubar L., Dubois A., Dubar M., Oudin J. (2002). Characterisation of the influence of thin solid coating on FLD in sheet metal forming. Euromech 435 colloquium, Simulation of Friction and Wear in Metal Forming, Valenciennes, France, juin .

Dubar M., Verleene A., Dubar L., Dubois A., Oudin J. (2001). Wear criterion for cold forging tool. T.S. Sudarshan and M. Jeandin, Surface Modification Technologies XIV, T.S. Sudarshan and M. Jeandin, pp. 294-298, septembre .

Dubar M., Dubois A., Dubar L., Oudin J. (2001). Wear monitoring in cold metal forming processes. A.M. Habraken, Proceedings of the Fourth ESAFORM Conference on Material Forming, Derouaux Ordina, Liège, pp. 203-206, avril .

Dubois A., Deltombe R., Viellard L., Dubar L., Oudin J. (2001). Selection criteria for oil in water emulsion used in cluster type rolling processes. J.R., M. Geiger, H.J.J. Kaals, B. Shirvani, U.P. Singh, Sheet Metal 2001, Duflou Eds, Leuven, pp. 1412-1418, avril .

Deltombe R., Dubois A., Dubar L., Oudin J., Viellard L., Naylor J.-P. (2001). Optimisation of a cluster type mill lubricated by oil water emulsion. ICIT 2001, Third International Conference on Industrial Tools, K. Kuzman, Rogaska slatina (Slovenia), pp. 83-86, avril ., ISBN 961-90401-5-5

Verleene A., Dubar M., Dubar L., Dubois A., Oudin J. (2001). Drift of cold forging tooling : towards their mastering. K. Kuzman, Third International Conference on Industrial Tools ICIT 2001, K. Kuzman, Rogaska Stalina (Slovenia), pp. 83-86, janvier .

Dubar L., Verleene A., Dubois A., Dubar M., Oudin J. (2001). Hardening behaviour law for TiN coated tool steel. T.S. Sudarshan and M. Jeandin, Surface Modification Technologies XIV, T.S. Sudarshan and M. Jeandin, pp. 482-487, janvier .

Dubar L., Verleene A., Dubar M., Dubois A., Oudin J. (2000). Vers la maîtrise de la dégradation des outillages de mise en forme à froid. Colloque Voies de Progrès en Forge et Frappe à Froid, Saint-Etienne, France, mars .

Dubois A., Dubar L., Oudin J. (2000). Caractérisation du frottement outil pièce en mise en forme à l'ambiante des aciers. Colloque National MECAMAT Surfaces Contact Frottement, P. Chabrand, M. Jean, M. Raous, Aussois, pp. 1-10, janvier .

Dubois A., Dubar L., Oudin J. (1998). Modèles de frottement en mise en forme à froid. Colloque Lubrification des Opérations de Frappe et de Forgeage à Froid, Saint-Etienne, France, mars .

Dubar L., Dubois A., Bricout J.-P., Oudin J. (1998). Stress-strain curves at the surface of zinc phosphate coated steel. Proceedings of the Surface Modification Technologies International Conference SMT XI, T. S. Sudarshan, M. Jeandin, K. A. Khor, London, pp. 775-785, janvier .

Hauw B., Dubar L., Dubois A., Oudin J. (1998). Mechanical behaviour of surface coatings in sheet metal forming. K.J.J. Kals, M. Geiger, B. Shirvani, Proceedings of the International Sheet Metal Forming, K.J.J. Kals, M. Geiger, B. Shirvani, Twente, pp. 257-265, janvier .

Lazzarotto L., Dubois A., Dubar L., Verleene A., Oudin J. (1998). Testing of zinc phosphate stearate coatings in wire drawing conditions. T.S. Sudarshan, M. Jeandin, K.A. Khor, Proceedings of the Surface Modification Technologies International Conference SMT XI, I.O.M. Communications, London, pp. 957-962, janvier .

Lazzarotto L., Dubar L., Dubois A., Ravassard P., Oudin J. (1998). Three selection criteria for the cold metal forming lubricating oils containing extreme pressure agents. Elsevier, Proceedings of the Metal Forming ‘98 International Conference, Elsevier, Amsterdam, pp. 245-250, janvier .

Verleene A., Dubar L., Dubois A., Oudin J. (1998). Méthodologie d'étude de la dégradation des outillages de frappe à froid par l'essai de compression translation. 37émesJournées du Cercle d'Étude des Métaux, Bulletin du Cercle d'Étude des Métaux Les aciers pour moules et outils, 17, pp. 2-5, janvier .

Dubar L., Lazzarotto L., Dubois A., Ravassard P., Oudin J. (1997). Contribution à la maîtrise des problèmes de frottement en mise en forme des aciers. Colloque SF2M Frottement Usure, Valenciennes, France, novembre .

Hauw B., Hivart P., Dubar L., Bricout J.-P., Oudin J. (1997). Optimisation tribologique des revêtements de phosphate de manganèse. Actes du 13éme Congrès Français de Mécanique, Poitiers, France, septembre .

Dubar L., Dubois A., Hauw B., Oudin J. (1997). Comportement mécanique des revêtements de surface utilisés en forge à froid. 40ème Colloque de Métallurgie, Saclay, France, juin .

Dubar L., Oudin J. (1997). Comportement mécanique des revêtement utilisés en mise en forme. Colloque Évolution des Traitements de Surface, Lille, France, avril .

Dubar L., Hauw B., Dubois A., Oudin J., Bricout J.-P. (1997). Comportement volumique des revêtements utilisés en mise en forme, application à l'étirage de barre. Colloque National MECAMAT Mécanique et Mécanismes des Matériaux Multifonctionnels, Aussois, France, janvier .

Hauw B., Hivart P., Dubar L., Bricout J.-P., Oudin J. (1997). Optimisation tribologique des revêtements de phosphate de manganèse. Association Universitaire de Mécanique, 13ème Congrès Français de Mécanique, AUM-GCM, Paris, pp. 348-354, janvier .

Dubar L., Oudin J. (1997). Implementation of a bulk behaviour model concerned with the coating damage of galvanised sheets intended for cold forging. D.R.J Owen, E.Onate, E.Hinton, Computational plasticity fundamentals and applications, Pineridge Press, Swansea, pp. 2039-2046, janvier .

Dubois A., Picart P., Dubar L., Oudin J., Cescotto S. (1996). Determination of the conditions of friction on steel specimen for the cold forging. Proc. of the 1996 ESDA (transaction of the ASME), France, janvier .

Lazzarotto L., Dubar L., Dubois A., Wierre C., Oudin J. (1996). Identification de la loi de comportement volumique au voisinage de la surface de produits destinés à la mise en forme. Colloque National Mécamat Aussois 96, Ecole des Mines de Paris, Aussois, F, janvier .

Guérin J.-D., Durand C., Moreau P., Freund L., La barbera sosa J., Puchi cabrera E., Bigot R., Dubar L. (2022). Principes et potentialités du test de formabilité à hautes températures EFForT, application à l'étude de la forgeabilité de l'Inconel 625. 25e Congrès Français de Mécanique, nantes, août .

Dubois A., Dubar L., Dubar M. (2021). Tribology under extreme conditions devoted to manufacturing processes : methods and approaches developed at LAMIH. Meeting of the thematic group" rolling processes" of the French Society of metallurgy and materials (SF2M), france,paris, octobre .

Boungomba H., Dubar M., Dubar L., Moreau P., Hubert C. (2019). Usure des outillages lors de l'étape d'enroulement des ressorts en acier. Moules & Outils, Albi (France), octobre .

Boubakri C., Wolff C., Nouari M., Moufki A., Dubar L., Watremez M., Hubert C. (2019). Utilisation de l'approche CEL pour la simulation numérique du micro-usinage d'un matériau en cuivre. 22e Congrès Français de Mécanique (CFM 2019), Brest, France, août .

Boubakri C., Wolff C., Nouari M., Moufki A., Dubar L., Watremez M., Meresse D., Hubert C. (2019). Modélisation multi-échelle et expérimentation du μ-usinage et du μ-contact outil-copeau. 27ème Journées manufacturing 21, Toulon, France, janvier .

Octau C., Lippert M., Dbouk T., Watremez M., Keirsbulck L., Dubar L. (2017). Etudes expérimentales et numériques d'un jet de particules : application au freinage ferroviaire. CFM 2017, Lille, août .

Hubert C., André D., Dubar L., Iordanoff I., Charles J.-L. (2017). Conduction électrique dans un domaine DEM continu. CSMA 2017 – 13ème Colloque National en Calcul des Structures, Giens (France), mai .

Dubois A., Dubar L., Dubar M. (2017). Caractérisation de la tribologie des procédés de mise en forme à haute température. Association Française de Mécanique, Lille, janvier .

Octau C., Lippert M., Dbouk T., Watremez M., Keirsbulck L., Dubar L. (2017). Etudes expérimentales et numériques d'un jet de particules : application au freinage ferroviaire. Association Française de Mécanique, Lille, janvier .

Le mercier K., Dubar M., Mocellin K., Dubois A., Dubar L. (2017). Quantification de l'usure adhésive en mise en forme à froid d'un alliage Al-Mg-Si. Association Française de Mécanique, Lille, janvier .

Chalon J., Dubar L., Guérin J.-D., Puchi cabrera E., Boukamel A. (2017). stratégie d'étude de la baisse des températures de forgeage appliquée à un alliage de cuivre Cu-Ni-Si. Association Française de Mécanique, Lille, janvier .

Watremez M., Le mercier K., Senecaut Y., Dubar L. (2017). Stratégie numérique et expérimentale pour la maîtrise de l'Usinage à Grande Vitesse. Association Française de Mécanique, Lille, janvier .

Dubois A., Filali O., Dubar M., Hubert C., Dubar L., Pham T. (2017). Vers la caractérisation du collage des alliages d'aluminium en mise en forme à froid. Association Française de Mécanique, Lille, janvier .

Le mercier K., Watremez M., Guérin J.-D., Fouilland L., Dubar L. (2013). Thermo-mechanical behaviour of spheroidal graphite iron in the austenitic phase. 21ème Congrès Français de Mécanique, AFM, Maison de la Mécanique, Bordeaux, France, août .

Dubois A., Hubert C., Dubar M., Dubar L. (2012). Influence of edge-trimming on the cracking of steel strip edge in cold rolling. EDP Science, Journées Annuelles de la SF2M, 100, Paris, pp. 31-32, septembre ., ISBN 978-2-7598-0821-2

Meresse D., Siroux M., Harmand S., Watremez M., Dubar L. (2012). Estimation de la distribution du flux thermique sur un disque par méthode inverse sur un essai frottant pion-disque. Congrès SFT 2012, Bordeaux, France, mai .

Heussaff A., Tison T., Watremez M., Dubar L., Nunes R. (2011). Variabilité du contact dans l'étude du crissement de freins automobile. Actes du 10ème colloque national en calcul des structures, Giens, France, mai .

Meresse D., Siroux M., Harmand S., Watremez M., Dubar L. (2010). Etude thermique du contact glissant disque-garniture en situation de freinage automobile. Congrès SFT 2010, Le Touquet, France, mai .

Deltombe R., Dubar M., Dubar L., Luc é. (2010). Vers une maîtrise du comportement à la déformation des oxydes à haute température. Journées internationales francophones 2010, 1, Presse des Mines, Albi, France, pp. 389-394, mai ., ISBN 978-235671-033-8

Dubois A., Dubar L., Dubar M. (2021). Tribology under extreme conditions devoted to manufacturing processes : methods and approaches developed at LAMIH. Meeting of the thematic group "rolling processes" of the French Society of metallurgy and materials (SF2M), octobre .

Boubakri C., Wolff C., Nouari M., Moufki A., Dubar L., Watremez M., Meresse D., Hubert C. (2019). Modélisation multi-échelle et expérimentation du μ-usinage et du μ-contact outil-copeau. éminaire s 27e journées Manufacturing'21 (Manuf 21), Toulon, France, janvier .

Debras C., Dubois A., Dubar M., Dubar L. (2015). Nouvelle approche pour la prédiction de l'usure des outillages WC-Co en frappe à froid. Moules et Outils, Conférence invitée, Albi, France, octobre .

Dubois A., Dubar M., Dubar L. (2015). The Upsetting-Sliding test (URT) : a tribotest bench for rolling processes. 2nd tribology Workgroup seminar, Steel Forming International Scientific Networks, Metz, France, septembre .

Hubert C., Dubar M., Dubois A., Dubar L. (2015). Cold forging of aluminium: effect of contact pressure, plastic strain and sliding velocity on sticking. 8th Workshop of the ICFG Subgroup on Process Simulation, Daejeon, Korea, septembre .

Hubert C., Dubar L., Christiansen P., Bay N., Dubois A. (2012). Liquid lubrication mechanisms in sheet metal forming at mesoscopic scale. 7th ICFG Workshop on Process Simulation in Metalforming, Gifu, Japan, septembre .

Hubert C., Dubar L., Dubar M., Dubois A. (2011). Numerical simulation of lubrication mechanisms at mesoscopic scale. GDR Interaction Fluide Structure Workshop, CEMEF - Sophia Antipolis, France, novembre .

Watremez M., Dubar L. (2011). Usinage : Des progrès vitesse grand V – Machining: Progress at top speed. J'innove en Nord-Pas de Calais, novembre .

Dubar L., Dubois A., Dubar M. (2008). Modelling of flattening of asperities in cold rolling. Third cold rolling day, Isbergues, mai .

Dubois A., Dubar M., Dubar L., Deltombe R. (2008). Caractérisation tribologique des procédés de mise en forme. Colloque SF2M section Nord, Saint Omer, janvier .

Brocail J., Watremez M., Deltombe R., Dubar L. (2007). Identification of friction variables at the toll-chip interface for high speed machining. Constitutive Relations and Numerical Simulation of Industrial Dynamic Processes, Metz, novembre .

Le mercier K., Moreau P., Dubar L. (2018). Étude du comportement tribologique de différents lubrifiants par le biais d'essais de compression-translation. Rapport 17M162 Condat SA, LAMIH - Institut Carnot, Valenciennes, mars .

Dubar L., Moreau P. (2017). CAP Storage. Rapport de fin de projet SIFRE (LAMIH-DSI-ENSIAME), Université de Valenciennes et du Hainaut Cambresis, Valenciennes, décembre .

Malo estepa A., Dubar L., Dubois A. (2015). Modélisation multiphysique du montage et de l'utilisation d'une griffe de jonction de caténaire. Rapport FUI Railconnect+, LAMIH, Valenciennes, janvier .

Malo estepa A., Chalon J., Dubar L., Dubois A. (2015). Mise en forme d'une griffe de jonction de caténaire en alliage de cuivre CuNiSi. Rapport FUI Railconnect+, LAMIH, Valenciennes, janvier .

Deltombe R., Daouben E., Dubar L., Dubois A., Dubar M. (2008). Etude de l'usure des outillages en forge à chaud mise place d'une plateforme expérimentale de pulvérisation des outillages, essais de frottement à chaud. Rapport de contrat CETIM LAMIH - VALUTEC, LAMIH - VALUTEC, Valenciennes, janvier .

Brocail J., Watremez M., Dubar L. (2007). Analyse de l'interface outil-copeau en usinage à grande vitesse : modélisation ALE et étude de l'acier 304L. Rapport de contrat Fondation CETIM, Université de Valenciennes et du Hainaut Cambrésis, Valenciennes, novembre .

Szczurek E., Dubar L., Dubois A., Dubar M., Deltombe R. (2007). Analyse du cordage en coil coating. Rapport de contrat Myriad - Groupe CORUS, Université de Valenciennes et du Hainaut Cambrésis, Valenciennes, mai .

Brocail J., Watremez M., Dubar L. (2007). Analyse de l'interface outil-copeau en usinage à grande vitesse : campagnes d'essais sur XC38. Rapport de contrat Fondation CETIM, Université de Valenciennes et du Hainaut Cambrésis, Valenciennes, mai .

Deltombe R., Daouben E., Dubar L., Dubois A., Dubar M. (2005). Etude de l'usure des outillages en forge à chaud. Rapport de contrat CETIM LAMIH, LAMIH, Valenciennes, décembre .

Huart S., Dubar L., Dubois A., Dubar M., Deltombe R. (2005). Analyse du Skin Pass des tôles galvanisées. Rapport de contrat Myriad - Groupe CORUS, LAMIH, Valenciennes, mai .

Morgado N., Dubar L., Dubois A., Dubar M., Deltombe R., Oudin J. (2003). Rapport final de contrat CETIM-LAMIH. Réalisation d'un banc d'essai en vue de la caractérisation du frottement et de la lubrification en forge à chaud, LAMIH, Valenciennes, septembre .

Deltombe R., Dubar L., Dubar M., Dubois A. (2003). Rapport de contrat ASCOMETAL-CREAS-LAMIH. Identification de coefficients de frottement en mise en forme à froid lors d'un procédé multi passes, LAMIH, Valenciennes, juin .

Morgado N., Dubar L., Dubois A. (2002). Rapport intermédiaire de contrat CETIM-LAMIH. Etudes des conditions de frottement et de lubrification en mise en forme par forgeage à chaud et à mi-chaud, LAMIH, Valenciennes, novembre .

Dubois A., Dubar L., Dubar M., Deltombe R. (2002). Identification de coefficients de frottement en mise en forme à froid lors d'un procédé multi passes. Rapport de contrat ASCOMETAL-CREAS, Université, LAMIH, Valenciennes, janvier .

Verleene A., Dubar M., Dubar L., Dubois A., Oudin J. (2001). Rapport final de contrat CETIM-SETFORGE-LAMIH. Vers la maîtrise de la dégradation des outillages de mise en forme à froid, LAMIH, Valenciennes, décembre .

Verleene A., Dubar M., Dubar L., Dubois A., Oudin J. (2000). Maîtrise de la dégradation des outillages de mise en forme à froid. Rapport de recherche CETIM, UVHC, LAMIH, Valenciennes, janvier .

Morgado N., Dubar L., Dubois A. (2000). Etudes des conditions de frottement et de lubrication en mise en forme par forgeage à chaud et à mi-chaud. Rapport de recherche CETIM, Université, LAMIH, Valenciennes, janvier .

Leseney B., Dubois A., Dubar L., Oudin J. (1999). Optimisation du procédé d'emboutissage à froid des fonds de cuve. Rapport de recherche CEREC, UVHC, LAMIH, Valenciennes, janvier .

Oudin J., Dubar L. (1999). Identification des lois de comportement en surface. Rapport de recherche, FEDER, Université, LAMIH, Valenciennes, janvier .

Verleene A., Dubar M., Dubar L., Dubois A., Oudin J. (1999). Marqueurs d'usure et d'endommagement des outillages de mise en forme. CETIM, Université, LAMIH, Valenciennes, janvier .

Dubar L., Oudin J. (1998). Maîtrise du frottement et de l'échauffement entre pièces mécaniques. FEDER, Université, LAMIH, Valenciennes, janvier .

Lazzarotto L., Dubar L., Dubois A., Oudin J. (1998). Contribution à la maîtrise des conditions de frottement en forge à froid. CETIM, Université, LAMIH, Valenciennes, janvier .

Dubar L., Dubois A., Oudin J. (1998). Etude comparative des performances tribologiques d'huiles de frappe à froid. MOBIL, Université, LAMIH, Valenciennes, janvier .

Guérin J.-D., Dubar L., Oudin J. (1997). Mise au point et validation de l'essai de compression à chaud sur éprouvettes de type Rastegaev. CETIM/ACR2, LAMIH, Valenciennes, janvier .

Noël G., Dubar L., Bricout J.-P. (1997). Optimisation par l'essai de compression–translation des conditions de frottement dans les serres flans en emboutissage. Maubeuge Construction Automobile, LAMIH, Valenciennes, janvier .

Dubar L., Oudin J. (1997). Thermomécanique des surfaces en grandes déformations. FEDER, Université, LAMIH, Valenciennes, janvier .

Dubar L., Oudin J. (1997). Thermomécanique des surfaces en grandes déformations. Rapport de recherche, Région Nord Pas de Calais, Université, LAMIH, Valenciennes, janvier .

Dubar L. (2000). Mise en forme à froid des aciers, nouvelle approche des contacts outil pièce. , Univ. Valenciennes Et Du Hainaut-Cambrésis, janvier .

Santin J.-J., Paganelli S., Delobel S., Delille R., Dubar L. (2021). Dispositif antivibratoire pour le transport d'une substance telle qu'un vaccin à ARN messager. , janvier .