FrançaisEnglishEspañol

direct access

Digital workspace
Directory
Research laboratories

Publications

Affichage de 1431 à 1440 sur 5525

  • ART

Effect of higher and lower order alcohol blending with gasoline on performance, emission and combustion characteristics of SI engine

Edwin Geo Varuvel, D. Godwin, Shanmugam Thiyagarajan, C. G. Saravanan, Fethi Aloui

This investigation mainly focuses on the characteristic study on combustion, performance and emission of gasoline blended with lower order alcohol, i.e. ethanol and higher order alcohol, i.e. benzyl alcohol in the ratio of 10% and 20% by volume of the overall quantity. These two alcohols were…

Fuel, 2019, 256, pp.115806. ⟨10.1016/j.fuel.2019.115806⟩. ⟨hal-03442392⟩

  • ART

Special issue on shared and cooperative control

Frank Flemisch, David Abbink, Makoto Itoh, Marie-Pierre Pacaux-Lemoine

This special issue bridges a gap between the worlds of manually controlled human machine systems and so called autonomous systems, where the machine is in control alone. In contrast to autonomous systems, with Shared Control and its extension Cooperative Control both the human(s) and the machine(s…

Cognition, Technology and Work, 2019, 21 (4), pp.553-554. ⟨10.1007/s10111-019-00607-x⟩. ⟨hal-03642534⟩

  • COMM

Identification de paramètres physiologiques et biomécaniques pour la prédiction de survenue de blessure de cheville chez les handballeuses

Marion Sauvage, Christophe Gillet, Sebastien Leteneur, Jennifer Bassement

L’objectif de cette étude est d’identifier des paramètres permettant de prédire la survenue des blessures de chevilles chez les handballeuses professionnelles. 12 joueuses âgées de 19 à 28 ans, évoluant en 1e division lors de la saison 2019, ont pris part à l’étude. Des paramètres subjectifs ont…

ACAPS 2019, Oct 2019, Paris, France. ⟨hal-03475292⟩

  • COMM

The use of pressure sensors for the improvement of limbsocket interface in lower limb amputation : A pilot study

Marit Mellemseter, Christophe Gillet, Sebastien Leteneur, Jennifer Bassement

30-100% of people with lower limb amputation have reported problems causing discomfort or residual-limb complications altering their ability to walk. Appropriate fit of the prosthetic may be considered the most important parameter in the success of a lower-limb prosthesis, and poor fit can result in…

ACAPS 2019, Oct 2019, Paris, France. ⟨hal-03475296⟩

  • COUV

Constitutive Modeling of Polyamide Split Hopkinson Pressure Bars for the Design of a Pre-stretched Apparatus

Anthony Bracq, Grégory Haugou, Hervé Morvan

This paper aims to model the constitutive behavior of polyamide material used in the Split Hopkinson Pressure bars (SHPB). The Hopkinson bars apparatus is employed for the mechanical characterization of many materials under high strain rates at large strains. Nevertheless, testing soft materials is…

Dynamic Behavior of Materials, 1, Springer International Publishing, pp.201-205, 2019, Conference Proceedings of the Society for Experimental Mechanics Series, ⟨10.1007/978-3-319-95089-1_36⟩. ⟨hal-03579530⟩

  • COMM

Constitutive Modeling of Polyamide Split Hopkinson Pressure Bars for the Design of a Pre-stretched Apparatus

Anthony Bracq, Grégory Haugou, Hervé Morvan

This paper aims to model the constitutive behavior of polyamide material used in the Split Hopkinson Pressure bars (SHPB). The Hopkinson bars apparatus is employed for the mechanical characterization of many materials under high strain rates at large strains. Nevertheless, testing soft materials is…

SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2018, Jun 2018, Greenville, United States. pp.201-205, ⟨10.1007/978-3-319-95089-1_36⟩. ⟨hal-03679892⟩

  • THESE

Influence of surface texturing on the biocompatibility of breast implants, Influence de la texturation de surface sur la biocompatibilité des implants mammaires

Charles Garabedian

The first breast implant surface pattern approved by the American Food and Drug Administration (FDA) is Biocell texture commercialized by the American company Allergan in 1987. Most breast implant manufacturers then adopted similar surface patterning process. A report from the Agence Nationale de…, La première structuration de surface d’implants mammaires approuvée par l’agence sanitaire américaine Food and Drug Administration (FDA) est la texturation Biocell de l’Américain Allergan en 1987. La plupart des fabricants d’implants mammaires ont ensuite adopté des procédés permettant d’obtenir…

Engineering Sciences [physics]. Université Polytechnique Hauts-de-France, 2019. English. ⟨NNT : 2019UPHF0007⟩. ⟨tel-03359321⟩

  • ART

FPGA Implementation of a Novel Construction of Optical Zero-Correlation Zone Codes for OCDMA Systems

Samia Driz, Benattou Fassi, Mohammed Amine Mansour, Abdelmalik Taleb-Ahmed

This paper proposes a novel method for constructing optical zero-correlation zone (OZCZ) codes based on the Mutually Orthogonal Complementary Sets (MOCS) matrix and the concatenation operation. The most important property of the obtained codes is that the periodic correlation function of the…

Journal of Optical Communications, 2019, ⟨10.1515/joc-2019-0048⟩. ⟨hal-03679875⟩

  • COMM

Optimal Direct Adaptive Fuzzy Controller based on Bat Algorithm for UAV Quadrotor

Hossam Eddine Glida, Latifa Abdou, Abdelghani Chelihi, Chouki Sentouh

An optimal direct robust adaptive fuzzy controller (ODAFC) for a quadrotor system using bat algorithm (BA) is presented in this paper. The concept of this approach is to decouple the entire system into four single-input single-output (SISO) subsystems. Then, a Mamdani-type fuzzy adaptive controller…

2019 8th International Conference on Systems and Control (ICSC), Oct 2019, Marrakesh, Morocco. pp.52-57, ⟨10.1109/ICSC47195.2019.8950585⟩. ⟨hal-03406797⟩

  • THESE

Contribution à la modélisation des chaînes informationnelles et des processus décisionnels associés à un produit "intelligent, Contribution to the modelling of information chains and decision making processes associated with an « intelligent » product

Vivien Basselot

Ces dernières années, les produits dits « intelligents » ont été introduits dans de nombreux domaines tels que l’industrie, la santé et le transport. Ces produits sont devenus sources d’informations durant leurs phases d’utilisations. L’obtention de ces informations constitue un avantage certain…, In recent years, “smart products” have been introduced in many areas such as industry, health and transportation systems. These products are sources of information during their use phases. Collecting, processing this information is a definite advantage to aid the various stakeholders involved in…

Contribution à la modélisation des chaînes informationnelles et des processus décisionnels associés à un produit "intelligent". Sciences de l'ingénieur [physics]. Université Polytechnique Hauts-de-France, 2019. Français. ⟨NNT : 2019UPHF0009⟩. ⟨tel-03368976⟩