Publications

Affichage de 2161 à 2170 sur 5525

ART

Effect of robotic-assisted gait rehabilitation on dynamic equilibrium control in the gait of children with cerebral palsy

Laura Wallard, Gilles Dietrich, Y. Kerlirzin, Jonathan Bredin

Due to the intensity and repetition of movement, roboticassisted gait training therapy could have a beneficial effect on the recovery and improvement of postural and locomotor functions of the patient. This study sought to highlight the effects of robotic-assisted gait rehabilitation in gait of…

Gait & Posture, 2018, 60, pp.55-60. ⟨10.1016/j.gaitpost.2017.11.007⟩. ⟨hal-03464963⟩

COMM

Experimental study of the mechanical strength and the failure of multi-sheet, multi-material spot-welded assemblies under pure and combined loading conditions

Rim Chtourou, Fahmi Chaari, Grégory Haugou, Nicolas Leconte, Eric Markiewicz, Bassem Zouari

Resistance Spot Welding (RSW) is widely used in the automotive industry thanks to its production convenience and cost effectiveness. Around four thousands spot welds are indeed employed to assemble the body-in-white. RSW of multiple sheets and combining multiple materials are increasingly realized…

12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading (DYMAT 2018), Sep 2018, Arcachon, France. pp.02009, ⟨10.1051/epjconf/201818302009⟩. ⟨hal-03433309⟩

ART

Hybrid control design for limit cycle stabilisation of planar switched systems

Mohammed Benmiloud, Atallah Benalia, Mohamed Djemai, Michael Defoort

This paper addresses the control problem of an important class of hybrid dynamical systems where the desired state does not belong to the set of subsystem equilibria. Beyond the practical stabilisation where the system trajectory has to be driven to a neighbourhood of a desired state, a control law…

International Journal of Control, 2018, 91 (7), pp.1720-1729. ⟨10.1080/00207179.2017.1327723⟩. ⟨hal-03428129⟩

ART

An Analysis of Electroplated cBN Grinding Wheel Wear and Conditioning during Creep Feed Grinding of Aeronautical Alloys

Gorka Vidal Irusta, Naiara Ortega, Héctor Bravo, Mirentxu Dubar, Haizea González

Cubic boron nitride (cBN), in addition to diamond, is one of the two superabrasives most commonly used for grinding hard materials such as ceramics or difficult-to-cut metal alloys such as nickel-based aeronautical alloys. In the manufacturing process of turbine parts, electroplated cBN wheels are…

Metals, 2018, 8 (5), pp.350. ⟨10.3390/met8050350⟩. ⟨hal-03451113⟩

ART

Two-dimensional heat transfer coefficients with simultaneous flow visualisations during two-phase flow boiling in a PDMS microchannel

Sofia Korniliou, Coinneach Mackenzie-Dover, John R.E. Christy, Souad Harmand, Anthony J. Walton, Khellil Sefiane

Infrared (IR) thermography was combined with simultaneous high speed flow visualisation and pressure measurements from integrated pressure sensors inside the microchannel, in order to produce two-dimensional (2D) high spatial and temporal resolution two-phase heat transfer coefficient (HTC) maps…

Applied Thermal Engineering, 2018, 130, pp.624-636. ⟨10.1016/j.applthermaleng.2017.11.003⟩. ⟨hal-03450056⟩

ART

Sliding-Mode-Based Observer–Controller Structure for Fault-Resilient Control in DC Servomotors

Suneel Kumar Kommuri, Jagat Jyoti Rath, Kalyana Chakravarthy Veluvolu

This paper presents a robust observer-controller scheme for sensor fault-resilient control in dc servomotor drive-based applications (such as antennae control for satellite tracking, radio telescopes, and conveyor belt systems). In contrast to the earlier works on abrupt faults, this paper…

IEEE Transactions on Industrial Electronics, 2018, 65 (1), pp.918-929. ⟨10.1109/TIE.2017.2721883⟩. ⟨hal-03675803⟩

ART

LMI-Based Controller Design for Time-Delay Nonlinear Descriptor Systems with Guaranteed Exponential Estimates

Juan Carlos Arceo Luzanilla, Raúl Villafuerte, Víctor Estrada Manzo, Miguel Bernal

This report is concerned with stability and stabilization of time-delay nonlinear nonsigular descriptor systems. Based-on a Lyapunov-Krasovskii functional and an exact convex representation of the system, conditions in the form of linear matrix inequalities are found that guarantee exponential…

IFAC-PapersOnLine, 2018, 51 (13), pp.585-590. ⟨10.1016/j.ifacol.2018.07.343⟩. ⟨hal-03671705⟩

COMM

Functional and Corticomuscular Changes Associated with Early Phase of Motor Training

Sylvain Cremoux, Dimitri Elie, Cecilie Rovsing, Helene Rovsing, Mads Jochumsen, Heidi Haavik, Imran K. Niazi

This study aimed to evaluate the corticomuscular changes associated with motor training. We quantified functional and corticomuscular changes during a four-days motor training. Results revealed better functional performance and increased magnitude of corticomuscular coherence in the 8–13 Hz…

4th International Conference on NeuroRehabilitation, Oct 2018, Pisa, Italy. ⟨10.1007/978-3-030-01845-0_151⟩. ⟨hal-03462927⟩

ART

Computational fluid dynamical analysis of new obstacle design and its impact on the heat transfer enhancement in a specific type of air flow geometry

Younes Menni, Ahmed Azzi, Faouzi Didi, Souad Harmand

The present work focuses on the study of an interesting topic from different points of view, that is, theoretical, practical, and numerical modeling. This study aims to improve the heat transfer within thermal devices like heat exchangers, solar air collectors, and other electronic equipment; these…

Computational Thermal Sciences: An International Journal, 2018, 10 (5), pp.421-447. ⟨10.1615/ComputThermalScien.2018024416⟩. ⟨hal-03450799⟩

COMM

LMI-based 2-DoF control design of a manipulator via T-S descriptor approach

van Anh Nguyen Thi, Tran Anh-Tu Nguyen, Antoine Dequidt, Laurent Vermeiren, Michel Dambrine

This paper presents a method for the control design of a manipulator. The design goal is to achieve a guaranteed H∞ model reference tracking performance with respect to bounded reference inputs through a 2-DoF control scheme. To achieve this goal, the manipulator system is represented by a Takagi-…

12th IFAC SYMPOSIUM ON ROBOT CONTROL (SYROCO 2018), Aug 2020, Budapest, Hungary. pp.102-107, ⟨10.1016/j.ifacol.2018.11.525⟩. ⟨hal-03409259⟩