Publicaciones

• Thèse

Materials-Processes connections under extreme dynamic conditions, Couplages Matériaux-Procédés en conditions dynamiques extrêmes

Benjamin Zielinski

The objective of this thesis was to investigate the influence of the Magnetic Pulse Welding (MPW) process on the materials properties, and characteristics of the obtained joint. Several material couples were examined, with a specific focus on the Copper/Copper (Cu/Cu), and Aluminum/Copper (Al/Cu)..., L'objectif de ce travail de thèse était d'étudier l'impact du procédé du magnéto-soudage sur les propriétés des matériaux, ainsi que des caractéristiques du joint obtenu. Différents couples de matériaux ont été étudiés, une attention particulière a été portée sur le couple Cuivre/...

Chemical and Process Engineering. Université Polytechnique Hauts-de-France; Institut national des sciences appliquées Hauts-de-France, 2024. English. ⟨NNT : 2024UPHF0018⟩. ⟨tel-05046526⟩

• Article dans une revue

Approche centrée agent pour l’intermodalité basée sur des données réelles

Azise Diallo, Arnaud Doniec, Guillaume Lozenguez, René Mandiau

Due to transport systems’ negative externalities (e.g., congestion, CO2 emissions), it is essential to have well-adapted simulation tools to study a sustainable mobility policy. In this paper, we propose a multi-agent framework allowing to evaluate existing intermodality policies and to be able to..., Face aux externalités négatives (par exemple, congestion, émissions de CO2, pollution sonore) des systèmes de transport, il est important de disposer d’outils de simulation adéquats pour aider à mettre en place une politique de mobilité plus respectueuse de l’environnement et économiquement...

Revue Ouverte d'Intelligence Artificielle, 2024, 5 (1), pp.95-129. ⟨10.5802/roia.66⟩. ⟨hal-04934768⟩

• Communication dans un congrès

Couches Minces Piézoélectriques sans Plomb de Bi_0,5Na_0,5TiO₃ élaborées par Pulvérisation Cathodique sur des Substrats de LaNiO₃/Si et Microstructuration par Gravure Humide : Etude des Propriétés aux Echelles Macroscopique et Nanométrique

M.M. Saj Mohan, Ahmed Hamieh, Antonio da Costa, Anthony Ferri, Sophie Barrau, Denis Remiens, Rachel Desfeux

• Communication dans un congrès

Comment les centrales inertielles influent sur la compréhension de la biomécanique ? Avis d’experts ouvrant de nouvelles perspectives dans l’analyse et l’amélioration des mouvements humains tout en respectant les exigences de qualité et de précision.

Mathias Blandeau, Laura Wallard

Global Industrie, Jun 2024, Paris, France. ⟨hal-04793253⟩

• Communication dans un congrès

Enhancing Touch Circular Knob with Haptic Feedback when Performing Another Saturating Attention Primary Task

Yosra Rekik, Adnane Guettaf, Matthieu Rupin, Milad Jamalzadeh, Laurent Grisoni

Touch knobs usually require visual attention when performing a targeting task. This can draw the user's visual focus to the device, which is not desirable if the visual attention is needed elsewhere. In this work, we investigated the use of haptic feedback for touch knobs when performing...

AVI 2024: International Conference on Advanced Visual Interfaces 2024, Jun 2024, Arenzano, Italy. pp.1-9, ⟨10.1145/3656650.3656656⟩. ⟨hal-04612216⟩

• Article dans une revue

A framework for detecting zero-day exploits in network flows

Almamy Touré, Youcef Imine, Alexis Semnont, Thierry Delot, Antoine Gallais

Computer Networks, 2024, 248, pp.110476. ⟨10.1016/j.comnet.2024.110476⟩. ⟨hal-05030985⟩

• Article dans une revue

Fault tolerant observer design for a class of nonlinear systems with corrupted outputs

Thierry‐marie Guerra, Vinicius Caseiro de Oliveira, Denis Berdjag, Chen Lv, Anh‐tu Nguyen

Abstract This paper presents new sufficient conditions for state and fault estimation of nonlinear systems. A new approach is proposed to deal with unmeasured premise variables and corrupted outputs. The adopted observer strategy consists of a scheduled gain that depends only on the estimated...

International Journal of Robust and Nonlinear Control, 2024, 34 (13), pp.8825-8843. ⟨10.1002/rnc.7446⟩. ⟨hal-05481337⟩

• Article dans une revue

Fault Tolerant Observer Design for a Class of Nonlinear Systems with Corrupted Outputs

Thierry‐marie Guerra, Vinicius Caseiro de Oliveira, Denis Berdjag, Chen Lv, Anh‐tu Nguyen

This paper presents new sufficient conditions for state and fault estimation of nonlinear systems. A new approach is proposed to deal with unmeasured premise variables and corrupted outputs. The adopted observer strategy consists of a scheduled gain that depends only on the estimated outputs...

International Journal of Robust and Nonlinear Control, 2024, 34 (13), pp.8825-8843. ⟨10.1002/rnc.7446⟩. ⟨hal-04841684⟩

• Communication dans un congrès

Modeling approaches of an industrial symbiosis: state-of-the-art

Soukaina Benchari, Cecilia Daquin, Yves Sallez, Emmanuelle Grislin-Le Strugeon

The linear economy (LE) system, utilized since the beginning of the industrial era, has demon strated its incapacity to fulfill the goals of sustainable development [4]. The linear production process, characterized by raw material extraction, production, consumption, and disposal, accelerated by...

Congrès annuel de la SAGIP, May 2024, Villeurbanne (Lyon), France. ⟨hal-04639336⟩

• Communication dans un congrès

Simulation of a reverse inventory logistics for a sustainable supply chain

Chaima Zormati, Tarik Chargui, Abdelghani Bekrar, Abdessamad Ait-El-Cadi

This study investigates the integration of reverse logistics within supply chain operations as a strategic approach to enhance sustainability and operational efficiency. In alignment with the global transition toward a circular economy, the research addresses the complex challenges associated with...

SAGIP, May 2024, Villeurbanne (INSA-Lyon), France. ⟨hal-05096115⟩