Publicaciones

• ART

Effect of using nanofluids on the performance of rotating heat pipe

Hamdy Hassan, Souad Harmand

Nanofluids have novel properties that make them potentially useful in many heat transfer applications. This paper presents a study on the effect of using nanofluids on the performance of rotating heat pipe. The effect of using nanofluids on the heat transfer and liquid film thickness is carried out...

Applied Mathematical Modelling, 2015, 39 (15), pp.4445-4462. ⟨10.1016/j.apm.2014.12.023⟩. ⟨hal-03451440⟩

• ART

Constitutive description of Fe–Mn23–C0.6 steel deformed under hot-working conditions

Eli Saúl Puchi-Cabrera, Jean-Dominique Guerin, Mirentxu Dubar, M.H. Staia, Jacky Lesage, Didier Chicot

As observed from the current literature, the vast majority of the constitutive models that have been proposed for the description of the changes in the high-temperature flow stress of high-Mn austenitic steels, in the course of plastic deformation as a function of deformation conditions, have been...

International Journal of Mechanical Sciences, 2015, 99, pp.143-153. ⟨10.1016/j.ijmecsci.2015.04.021⟩. ⟨hal-03577646⟩

• COMM

Industrial maintenance for sustainable performance: a systematic literature review

Sandro de Paula Pires, Olivier Sénéchal, Fernando Deschamps, Eduardo De Freitas Rocha Loures, Marcos Gonçalves Perroni

Nowadays, organizational performance is no longer evaluated by considering economic aspects alone. The use of social and environmental-related indicators has experienced an increasing growth. The balancing of these three dimensions (the Triple Bottom Line - TBL) in day-to-day organizational...

The 23rd International Conference on Production Research, Aug 2015, Manila, Philippines. ⟨hal-03414205⟩

• ART

Experimental comparison between different configurations of PCM based heat sinks for cooling electronic components

Salma Gharbi, Souad Harmand, Sadok Ben Jabrallah

The thermal control of electronic components is aimed at ensuring their use in a temperature range compatible with their performances. This paper presents an experimental study of the behavior of phase change materials (PCMs) as the cooling system for electronic devices. Four configurations are...

Applied Thermal Engineering, 2015, 87, pp.454-462. ⟨10.1016/j.applthermaleng.2015.05.024⟩. ⟨hal-03448604⟩

• ART

Modelling of progressive fibre/matrix debonding in short-fibre reinforced composites up to failure

Delphine Notta-Cuvier, Franck Lauro, Bruno Bennani

Mechanical behaviour of short-fibre reinforced composites (SFRC) can be affected by numerous damage phenomena. This paper focuses on the modelling of fibre/matrix debonding initiated at fibre tips, which is the dominant damage mechanism when a majority of short-fibres are subjected to local tensile...

International Journal of Solids and Structures, 2015, 66, pp.140-150. ⟨10.1016/j.ijsolstr.2015.03.034⟩. ⟨hal-03448614⟩

• COMM

Instanciação e Execução das Atividades do Processo de Análise de Desempenho de Processos de Software.

Rodrigo Figueiredo Magalhaes, Taisa Guidini Gonçalves, Ana Regina Rocha, Gleison Santos, Káthia Marçal de Oliveira

As organizações de software devem continuamente melhorar a forma de desenvolver software de modo que seus produtos finais atendam à qualidade esperada por seus clientes. Um dos mecanismos para apoiar o alcance desse objetivo é a análise de desempenho. A execução da análise de desempenho, entretanto..., Software organizations need to continuously improve the mechanisms to develop software in order to deliver better products to their customers. Process performance analysis is among the techniques that can be used to support this goal. However, software process performance analysis is not trivial...

Simpósio Brasileiro de Qualidade de Software, Aug 2015, Brasil, Brazil. pp.49-63, ⟨10.5753/sbqs.2015.15213⟩. ⟨hal-03388362⟩

• COMM

A Method to Compute Efficient 3d Helicopters Flight Trajectories Based on a Motion Polymorph-Primitives Algorithm.

Konstanca Nikolajevic, Nicolas Belanger, David Duvivier, Rabie Ben Atitallah, Abdelhakim Artiba

Finding the optimal 3D path of an aerial vehicle underflight mechanics constraints is a major challenge, especially whenthe algorithm has to produce real time results in flight. Kinematicsmodels and Pythagorian Hodograph curves have been widely usedin mobile robotics to solve this problematic. The...

Proceedings of the International Conference on Control and Automation Systems (ICCAS 2015), Aug 2015, Amsterdam, Netherlands. pp.1931-1939. ⟨hal-03385228⟩

• ART

Mechanistic insights on nanosilica self-networking inducing ultra-toughness of rubber-modified polylactide-based materials

Jérémy Odent, Jean-Marie Raquez, Jean-Michel Thomassin, Jean-Michel Gloaguen, Franck Lauro, Christine Jérôme, Jean Marc Lefebvre, Philippe Dubois

Developing novel strategies to improve the impact strength of PLA-based materials is gaining a significant importance in order to enlarge the range of applications for this renewable polymer. Recently, the authors have designed ultra-tough polylactide (PLA)-based materials through co-addition of...

Nanocomposites, 2015, 1 (3), pp.113-125. ⟨10.1179/2055033215Y.0000000005⟩. ⟨hal-03450915⟩

• ART

Erik Hollnagel: Safety-I and Safety-II, the past and future of safety management (book review)

Frédéric Vanderhaegen

Cognition, Technology and Work, 2015, 17 (3), pp.461-464. ⟨10.1007/s10111-015-0345-z⟩. ⟨hal-03428911⟩

• COMM

The influence of an arm sling on sit-to-stand of hemiplegic subjects

Amal Saadé, François Gabrielli, Sebastien Paganelli, Philippe Pudlo, Mathieu Lempereur, O. Rémy-Néris

40ème Congrès de la Société de Biomécanique, Oct 2015, Paris, France. pp.2050-2051. ⟨hal-03420269⟩