Publications

• Rapport

Livrable D4.1 : Spécifications des stratégies de coopération Homme-machine

Chouki Sentouh, Philippe Simon, Jérôme Floris, Jean-Christophe Popieul

[Rapport de recherche] LAMIH, Université Polytechnique des Hauts-de-France. 2018. ⟨hal-03420605⟩

• Article dans une revue

Quantitative Evolution of WC-Co Cemented Carbide Tool Surface during the Cold Forming of Steel Parts

Laurent Dubar, Colin Debras, Mirentxu Dubar, André Dubois

The present paper investigates the evolution of the WC grain size and morphology with the number of produced parts. Four reduction dies used in cold forward extrusion of steel are taken from the production line: a brand new die and three dies which have respectively produced 100.000, 150.000 and…

Key Engineering Materials, 2018, 767, pp.290-297. ⟨10.4028/www.scientific.net/KEM.767.290⟩. ⟨hal-03450818⟩

• Article dans une revue

Geometrically nonlinear bending analysis of functionally graded beam with variable thickness by a meshless method

Jun Lin, Jiao Li, Yanjin Guan, Guoqun Zhao, Hakim Naceur, Daniel Coutellier

Geometrically nonlinear bending deformation of Functionally Graded Beams (FGBs) with variable thickness is simulated by a meshless Smoothed Hydrodynamic Particle (SPH) method. The material properties of FGB is assumed to be varied smoothly in the thickness according to exponent-law distribution. To…

Composite Structures, 2018, 189, pp.239-246. ⟨10.1016/j.compstruct.2018.01.063⟩. ⟨hal-03450880⟩

• Article dans une revue

Influence of radiative heat transfer model on the computation of residual stresses in glass tempering process

Kossiga Agboka, Fabien Béchet, Norbert Siedow, Dominique Lochegnies

During glass tempering, residual stresses are caused by the temperature gradient appearing between the surface and the core of the glass. It is therefore necessary to have an accurate knowledge of the heat transfer occurring during the process to obtain an accurate estimation of the residual…

International Journal of Applied Glass Science, 2018, 9 (2), pp.235-251. ⟨10.1111/ijag.12335⟩. ⟨hal-03451187⟩

• Article dans une revue

Mechanisms of pattern formation from dried sessile drops

Maryam Maria Parsa, Souad Harmand, Khellil Sefiane

The formation of patterns after the evaporation of colloidal droplets deposited on a solid surface is an everyday natural phenomenon. During the past two decades, this topic has gained broader audience due to its numerous applications in biomedicine, nanotechnology, printing, coating, etc. This…

Advances in Colloid and Interface Science, 2018, 254, pp.22-47. ⟨10.1016/j.cis.2018.03.007⟩. ⟨hal-03450040⟩

• Communication dans un congrès

Wavelength characterization of an acousto-optic notch filter for unpolarized near-infrared light

Jean-Claude Kastelik, Justine Champagne, Samuel Dupont, Konstantin B. Yushkov

A cascaded system of two acousto-optical cells is proposed and experimentally demonstrated for optical notch rejection filtering in the spectral range from 1400 nm to 1600 nm. Two similar paratellurite acousto-optical devices for unpolarized light are used in a free-space gap of a fiber line.…

13th School on Acousto-Optics and Applications, Jun 2017, Moscow, Russia. pp.C36-C41. ⟨hal-03549268⟩

• Article dans une revue

Optimization of SAW-type Surface Wave Ultrasonic Sensors for Ultrasonic SHM

Rafatou Takpara, Marc Duquennoy, Mohammadi Ouaftouh, Christian Courtois, Frédéric Jenot, Mohamed Rguiti

Surface acoustic waves (SAW) are particularly suited for effectively monitoring and characterizing a structure’s surfaces (condition of the surface, coating, thin layer, micro-cracks, etc.), and in some cases it is necessary to permanently keep the sensors on the structures to enable continuous…

Research in Nondestructive Evaluation, 2018, 29 (2), pp.61-77. ⟨10.1080/09349847.2016.1252870⟩. ⟨hal-03117425⟩

• Article dans une revue

Modeling the viscoplastic flow behavior of a 20MnCr5 steel grade deformed under hot-working conditions, employing a meshless technique

Juan Carlos Álvarez-Hostos, Alfonso D. Bencomo, Eli Saúl Puchi-Cabrera, Jean-Dominique Guerin, Laurent Dubar

The present work has been conducted in order to develop a novel approach to predict the inhomogeneous flow of a 20MnCr5 steel during an axisymmetric hot compression test, by using the element-free Galerkin (EFG) method under a differential constitutive description. The governing equations have been…

International Journal of Plasticity, 2018, 103, pp.119-142. ⟨10.1016/j.ijplas.2018.01.005⟩. ⟨hal-03450115⟩

• Article dans une revue

Lagrangian submanifolds with constant angle functions of the nearly Kähler S3 × S3

Burcu Bektaş, Marilena Moruz, Joeri van Der Veken, Luc Vrancken

We study Lagrangian submanifolds of the nearly Kähler S3 × S3 with respect to their so called angle functions. We show that if all angle functions are constant, then the submanifold is either totally geodesic or has constant sectional curvature and there is a classification theorem that follows…

Journal of Geometry and Physics, 2018, 127, pp.1-13. ⟨10.1016/j.geomphys.2018.01.011⟩. ⟨hal-03233861⟩

• Ouvrages

Digital Land Art

Catherine Chomarat-Ruiz

L'auteure retrace la création du digital land art par des artistes contemporains qui se sont appropriés les technologies du numérique et les ont liées aux préoccupations du land. Elle étudie l'engagement de ces pionniers ainsi que leurs relations avec les arts plastiques, le numérique et…

Eterotopia France, 136 p., 2018, Parcours, 9791093250250. ⟨hal-03243757⟩