Publications

• Article dans une revue

Synthesis of In0.1Ga0.9N/GaN structures grown by MOCVD and MBE for high speed optoelectronics

Bandar Alshehri, Karim Dogheche, Sofiane Belahsene, Bilal Janjua, Abderrahim Ramdane, Gilles Patriarche, Tien Khee Ng, Boon Seng Ooi, Didier Decoster, El Hadj Dogheche

In this work, we report a comparative investigation of InxGa1-xN (SL) and InxGa1-xN/GaN (MQW) structures with an indium content equivalent to x=10%. Both structures are grown on (0001) sapphire substrates using MOCVD and MBE growth techniques. Optical properties are evaluated for samples using PL…

MRS Advances, 2016, 1 (23), pp.1735-1742. ⟨10.1557/adv.2016.417⟩. ⟨hal-03780652⟩

• Article dans une revue

Mineralogical and chemical characterization of DD3 kaolin from the east Algeria

Hamza Senoussi, Hocine Osmani, Christian Courtois, Mohamed El Hadi Bourahli

The mineralogical and chemical characteristics, based on X-ray diffraction (XRD) and scanning electron microscopy, of a kaolin known as DD3, from eastern Algeria were examined in the present study. The results showed that kaolin DD3 has an alumina content of 39%. The SiO2/Al2O3 molar ratio of 2.14…

Boletín de la Sociedad Española de Cerámica y Vidrio, 2016, 55 (3), pp.121-126. ⟨10.1016/j.bsecv.2015.12.001⟩. ⟨hal-03116798⟩

• Poster de conférence

Optimisation et simulation pour l’ordonnancement et la maintenance dans un environnement incertain.

Hanane Krim, Rachid Benmansour, David Duvivier

Poster présenté à la Matinée des Chercheurs 2016 (MDC'16), May 2016, Valenciennes, France. ⟨hal-03395941⟩

• Article dans une revue

Guided waves in general anisotropic layered rectangular rods: An extended orthogonal polynomial approach

J.G. Yu, Jean-Etienne Lefebvre, Ch. Zhang

The orthogonal polynomial approach has been used to solve the guided wave propagation in structures for about 20 years, but was limited until now to one-dimensional structures, that is, structures with a finite dimension in only one direction, such as horizontally infinite flat plates and axially…

Mathematics and Mechanics of Solids, 2016, 21 (5), pp.636-646. ⟨10.1177/1081286514533340⟩. ⟨hal-04080535⟩

• Article dans une revue

Editorial

Mourad Abed, Thierry-Marie Guerra, Adel M. Alimi

Transportation Research Part E: Logistics and Transportation Review, 2016, 89, pp.235. ⟨10.1016/j.tre.2016.03.011⟩. ⟨hal-03664837⟩

• Poster de conférence

Simulation temps réel appliquée aux transports intelligents.

Yomna Ben Jmaa Chtourou, David Duvivier, Rabie Ben Atitallah, Maher Ben Jemaa

Poster présenté à la Matinée des Chercheurs 2016 (MDC'16), May 2016, Valenciennes, France. ⟨hal-03395511⟩

• Article dans une revue

On classifiers for blind feature‐based automatic modulation classification over multiple‐input–multiple‐output channels

Sofiane Kharbech, Iyad Dayoub, Marie Zwingelstein, Eric Pierre Simon

Modulation recognition is crucial for a good environmental awareness required by cognitive radio systems. In this study, the authors design and compare models of four among the most commonly used classifiers for feature-based automatic modulation classification (FB-AMC) algorithms. Classifiers…

IET Communications, 2016, 10 (7), pp.790-795. ⟨10.1049/iet-com.2015.1124⟩. ⟨hal-03382947⟩

• Article dans une revue

Dynamic modelling of the expansion cylinder of an open Joule cycle Ericsson engine: A bond graph approach

Marie Creyx, Eric Delacourt, Céline Morin, Bernard Desmet

A dynamic model using the bond graph formalism of the expansion cylinder of an open Joule cycle Ericsson engine intended for a biomass-fuelled micro-CHP system is presented. Dynamic phenomena, such as the thermodynamic evolution of air, the instantaneous air mass flow rates linked to pressure drops…

Energy, 2016, 102, pp.31-43. ⟨10.1016/j.energy.2016.01.106⟩. ⟨hal-03445925⟩

• Article dans une revue

Correlation modeling between process condition of sandblasting and surface texture: A multi-scale approach

Hsin Shen Ho, Maxence Bigerelle, Renald Vincent, Raphaël Deltombe

In the present study, the influence of sandblasting condition (working pressure) on surface texture is modeled, relying on a multi-scale approach and statistical analysis. To improve the correlation modeling between the process condition and surface texture, special effort is made to identification…

Scanning, 2016, 38 (3), pp.191-201. ⟨10.1002/sca.21254⟩. ⟨hal-03448262⟩

• Article dans une revue

Heat exchanger identification by using iterative fuzzy observers

Sylvain Lalot, Oddgeir Guðmundsson, Halldor Pálsson, Ólafur Pétur Pálsson

The principle of fuzzy observers is first illustrated on a general example: the determination of the two parameters of second order systems using a step response. The set of equations describing the system are presented and it is shown that accurate results are obtained, even for a high level of…

Heat and Mass Transfer, 2016, 52 (5), pp.937-946. ⟨10.1007/s00231-015-1613-4⟩. ⟨hal-03445967⟩