Publications

• Article dans une revue

Synthesis of In0.1Ga0.9N/GaN structures grown by MOCVD and MBE for high speed optoelectronics

Bandar Alshehri, Karim Dogheche, Sofiane Belahsene, Bilal Janjua, Abderrahim Ramdane, Gilles Patriarche, Tien Khee Ng, Boon Seng Ooi, Didier Decoster, El Hadj Dogheche

In this work, we report a comparative investigation of InxGa1-xN (SL) and InxGa1-xN/GaN (MQW) structures with an indium content equivalent to x=10%. Both structures are grown on (0001) sapphire substrates using MOCVD and MBE growth techniques. Optical properties are evaluated for samples using PL…

MRS Advances, 2016, 1 (23), pp.1735-1742. ⟨10.1557/adv.2016.417⟩. ⟨hal-03780652⟩

• Poster de conférence

Optimisation et simulation pour l’ordonnancement et la maintenance dans un environnement incertain.

Hanane Krim, Rachid Benmansour, David Duvivier

Poster présenté à la Matinée des Chercheurs 2016 (MDC'16), May 2016, Valenciennes, France. ⟨hal-03395941⟩

• Article dans une revue

Mineralogical and chemical characterization of DD3 kaolin from the east Algeria

Hamza Senoussi, Hocine Osmani, Christian Courtois, Mohamed El Hadi Bourahli

The mineralogical and chemical characteristics, based on X-ray diffraction (XRD) and scanning electron microscopy, of a kaolin known as DD3, from eastern Algeria were examined in the present study. The results showed that kaolin DD3 has an alumina content of 39%. The SiO2/Al2O3 molar ratio of 2.14…

Boletín de la Sociedad Española de Cerámica y Vidrio, 2016, 55 (3), pp.121-126. ⟨10.1016/j.bsecv.2015.12.001⟩. ⟨hal-03116798⟩

• Rapport

Cap Qualité - Planification

Philippe Moreau, Cécile Roselle, Véronique Landrain, Laurent Keirsbulck, Jean-Dominique Guerin

[Rapport de recherche] Rapport intermédiaire LAMIH- Institut Carnot, Université de valenciennes et du Hainaut-Cambrésis. 2016. ⟨hal-03442584⟩

• Article dans une revue

Experimental determination of the elbow’s center of rotation using the VICON™ optoelectronic motion capture system

Elvire Guerre, Pascale Laronde, Jérôme Cussonneau, Christian Fontaine, Guillaume Wavreille

Purpose: Knowledge of elbow kinematics is essential to better understand this joint. There is currently no reliable dynamic method to accurately study the elbow joint in a non-invasive manner. The goal of this study was to implement an accurate protocol to study in vivo elbow kinematics using a…

Surgical and Radiologic Anatomy, 2016, 38 (4), pp.395-401. ⟨10.1007/s00276-015-1589-2⟩. ⟨hal-03669131⟩

• Article dans une revue

Strain effects on an electrostrictive polymer composite for power harvesting: experiments and modeling

Adil Eddiai, Mounir Meddad, M’hammed Mazroui, Yahia Boughaleb, M. Idiri, R. Khanfer, Mohamed Rguiti

In the field of vibrational energy harvesting, the electromechanical conversion demonstrated the many advantages of using electrostrictive polymers. These materials present advantageous features such as high productivity and high flexibility. The aim of this work is to provide a solution for…

Polymers for Advanced Technologies, 2016, 27 (5), pp.677-684. ⟨10.1002/pat.3738⟩. ⟨hal-03149401⟩

• Article dans une revue

Dynamic modelling of the expansion cylinder of an open Joule cycle Ericsson engine: A bond graph approach

Marie Creyx, Eric Delacourt, Céline Morin, Bernard Desmet

A dynamic model using the bond graph formalism of the expansion cylinder of an open Joule cycle Ericsson engine intended for a biomass-fuelled micro-CHP system is presented. Dynamic phenomena, such as the thermodynamic evolution of air, the instantaneous air mass flow rates linked to pressure drops…

Energy, 2016, 102, pp.31-43. ⟨10.1016/j.energy.2016.01.106⟩. ⟨hal-03445925⟩

• Article dans une revue

Correlation modeling between process condition of sandblasting and surface texture: A multi-scale approach

Hsin Shen Ho, Maxence Bigerelle, Renald Vincent, Raphaël Deltombe

In the present study, the influence of sandblasting condition (working pressure) on surface texture is modeled, relying on a multi-scale approach and statistical analysis. To improve the correlation modeling between the process condition and surface texture, special effort is made to identification…

Scanning, 2016, 38 (3), pp.191-201. ⟨10.1002/sca.21254⟩. ⟨hal-03448262⟩

• Article dans une revue

Heat exchanger identification by using iterative fuzzy observers

Sylvain Lalot, Oddgeir Guðmundsson, Halldor Pálsson, Ólafur Pétur Pálsson

The principle of fuzzy observers is first illustrated on a general example: the determination of the two parameters of second order systems using a step response. The set of equations describing the system are presented and it is shown that accurate results are obtained, even for a high level of…

Heat and Mass Transfer, 2016, 52 (5), pp.937-946. ⟨10.1007/s00231-015-1613-4⟩. ⟨hal-03445967⟩

• Chapitre d'ouvrage

Activité physique régulière et contrôle postural. Apprentissage moteur et contrôle postural chez l’enfant

Laura Wallard, Gilles Dietrich, Yves Kerlirzin, Jonathan Bredin

Paillard, T. Posture et équilibration humaines, collections Posture, équilibre et mouvement, De Boeck Solal, pp. 183-189, 2016, 9782353273140. ⟨hal-03462807⟩